Connecting Usb Devices; Devices) (Emp-1815 Only) - Epson EMP-1815 User Manual

Connecting USB Devices (Digital Camera, Hard Disk Drive or Memory Devices) (EMP-1815 Only)
USB2.0/1.1-compatible digital cameras, hard disk drives and USB
storage devices can be connected to the projector. Image files that are
stored inside the digital camera and scenarios, images and movies
that are stored inside USB storage devices can be played back by
EasyMP CardPlayer. sEasyMP Operation Guide "PC Free Basic
Operations"

Connecting USB Devices

The following procedure describes how to connect USB devices, using a
digital camera as an example.
Connect a digital camera to the projector using a USB cable provided
with, or specified for use with your digital camera.
• Use a USB cable less than 3m in length. If the cable
q
exceeds 3m, CardPlayer may not function correctly.
• Check that there is no wireless LAN card or memory card
in the projector's card slot before connecting any USB
device.
Downloaded from ProjectorsManual.com Manuals
USB cable
To USB port of
digital camera
Attention
• If you use a USB hub, the connection may not operate correctly.
Devices such as digital cameras and USB storage devices should
be connected to the projector directly.
• When using an USB-compatible hard disc, be sure to connect the
AC adaptor supplied with the hard disc.
To [USB Type A] port
82