Speakers
Description
Speakers (includes left and right speakers and cable)
Before removing the speakers, follow these steps:
1.
Shut down the computer. If you are unsure whether the computer is off or in Hibernation, turn the
computer on, and then shut it down through the operating system.
2.
Disconnect all external devices connected to the computer.
3.
Disconnect the power from the computer by first unplugging the power cord from the AC outlet
and then unplugging the AC adapter from the computer.
4.
Remove the battery (see
Memory module/wireless module compartment cover (see
●
Hard drive (see
●
Keyboard (see
●
Top cover (see
●
To remove the speakers:
1.
Disconnect the speaker cable (1) from the system board.
2.
To release the left speaker (2) out from under the system board, rotate the left speaker (3) toward
the system board.
Battery on page
56), and then remove the following components:
Hard drive on page
70)
Keyboard on page
76)
Top cover on page
79)
Spare part number
685106-001
WLAN module on page
Component replacement procedures
64)
87