Demonstration; Independent Mode Demonstration - Panasonic Grid-EYE User Manual

5.2 Demonstration

5.2.1 Independent Mode Demonstration

1) Connect USB to PC, set the jumpers, and check if LED D3 starts to blink.
Note: If LED D3 blinks every second, it indicates that USB device is recognized correctly by
the PC. If the LED does not blink at this frequency, it indicates that USB does not work
normally, please check the USB driver and USB cable.
2) Open device manager to check the COM id for USB virtual COM
If the COM port is not detected then reinstall the USB driver from
http://eu.industrial.panasonic.com/grideye-evalkit under
Software & Source Code for Download > USB Driver >
ATSAMD21G18A\ATSAMD21G18A_USB_DUART_DEMO\SAMD21_USB_DUART_DEMO
(the files used are: atmel_devices_cdc.cat and atmel_devices_cdc.inf).
36
User Manual Grid-EYE Evaluation Kit