Intercept Routing - Panasonic KX-TDA100 Feature Manual

1.9 I
After a call has been directed to its DIL, DID, or CLI destination, the following Intercept Routing
features, if programmed, can redirect the call.
Type
No Answer (IRNA)
Busy
DND
No Destination
Programming References
PC Programming Manual
2.7.17 [1-1] Slot—T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Trunk Property (for TIE channel)
2.16.2 [10-2] DIL Table & Port Settings—DIL—Trunk Property
PT Programming Manual
None

1.9.11 Intercept Routing

Description
Redirects an incoming CO line call or intercom call to a preprogrammed destination when the original
destination does not, or can not, answer the call. There are four types of Intercept Routing, described below.
Type
No Answer (IRNA)
160 Feature Manual
If a called party does not answer a call within a
preprogrammed time period (Intercept time), the call
is redirected to a preprogrammed destination.
If a called party is already handling another call, the
new call is redirected to a preprogrammed
destination.
If a called party is in Do Not Disturb (DND) mode, the
call is redirected to a preprogrammed destination.
If a destination is not assigned, the call is redirected
to an operator.
If a called party does not answer a call within a preprogrammed time period
(IRNA Timer), the call is redirected to a preprogrammed intercept
destination.
The assigned intercept destination of the extension port.
→ 2.8.4 [2-3] Timers & Counters
→ Dial / IRNA / Recall / Tone—Intercept Routing No Answer (IRNA)—
Day, Lunch, Break, Night
→ DISA / Door / Reminder / U. Conf—DISA—Intercept Timer—Day,
Lunch, Break, Night
→ [203] Intercept Time
Description
Description
Details in
• 1.9.11 Intercept
Routing
• 1.9.12 Intercept
Routing—No
Destination