•
If the Extension Feature Clear is performed, the corresponding extension data for both the wired
telephone and the PS will be cleared. (→ 1.5.5 Extension Feature Clear)
•
When a call arrives, both the wired telephone and the PS will ring. However, when one of the following
settings is made, only the telephone which was used to make the setting will ring.
–
Automatic Callback Busy (→ 1.1.4 Automatic Callback Busy (Camp-on))
–
Transfer Recall (→ 1.3.8 Call Transfer)
–
Hold Recall (→ 1.3.2 Call Hold)
–
Call Park Recall (→ 1.3.5 Call Park)
Programming References
PC Programming Manual
2.7.5 [1-1] Slot—Extension Port—DPT Type—Type (for DPT or S-Hybrid port)
2.7.31 [1-2] Portable Station—PS Registration and De-registration
2.8.8 [2-6-1] Numbering Plan—Main—Features—Wireless XDP Parallel Mode Set / Cancel
2.8.11 [2-7-1] Class of Service—COS Settings—Extension Feature—Accept Wireless XDP Parallel Mode
Set by PS
2.10.1 [4-1-1] Wired Extension—Extension Settings—Main—Wireless XDP
PT Programming Manual
[515] Wireless XDP Parallel Mode for Paired Telephone
Feature Manual References
1.3.19 COS (Class of Service)
1.13.2 Paralleled Telephone
Operating Manual References
1.3.75 Wireless XDP Parallel Mode
1.20 W
Feature Manual
339