Predialing - Panasonic KX-TDA100 Feature Manual

CO Line Cards: LCOT16 (4 PFT ports), LCOT8 (2 PFT ports)
Extension Cards: MSLC16 (4 PFT ports), SLC16 (4 PFT ports), DHLC8 (2 PFT ports) and SLC8 (2
PFT ports)
Connect only one extension card to one CO line card.
Note
Through system programming, it is possible to allow CO line calls that are established during a
power failure to be maintained even when the power returns and the connection is switched back
to the normal configuration from the Power Failure Connection. However, if no special
programming is performed, the connection will be dropped when power returns.
[KX-TDA50]
• Ports 1 and 2 of the LCOT card installed in the least slot number and ports 1 and 2 of the Super Hybrid
ports can be used for Power Failure Connections.
Note
The Power Failure Connections between the LCOT card and Super Hybrid ports are automatically
kept so that the conversation is maintained when the power is restored and the Main Board is
recovering.
Installation Manual References
KX-TDA50
2.10.1 Power Failure Connections
KX-TDA100/KX-TDA200
2.5.7 SLC16 Card (KX-TDA0174) and MSLC16 Card (KX-TDA0175)
2.11.1 Power Failure Connections
KX-TDA600
2.7.7 ESLC16 Card (KX-TDA6174) and EMSLC16 Card (KX-TDA6175)
2.13.1 Power Failure Connections
Programming References
PC Programming Manual
2.17.3 [11-3] Power Failure Transfer (KX-TDA100/KX-TDA200/KX-TDA600 only)
PT Programming Manual
None

1.13.10 Predialing

Description
A display proprietary telephone (PT) user can check and correct the number to be dialed on-hook. The call
will be initiated after going off-hook.
Conditions
• Storing the Predialed Number in Personal Speed Dialing
The predialed number can be stored in Personal Speed Dialing by pressing the AUTO DIAL/STORE
1.13 P
Feature Manual 213