Panasonic DP-2000 Operating Instructions Manual page 15

13
14
15
Installation and Configuration (Windows 95/98/Me)
The Add Port dialog box appears. Click the Other
radio button, and select HLPRMON from "Click the
type of port you want to add:" and click on the
button.
OK
The LPR Port Name dialog box appears.
Type the IP Address of the DP-2500 and "lp"as the
queue name separated by a ":"
Example: 192.168.3.23:lp
Click on the
OK
because the queue name was already used for the
same IP Address, select a unique name such as "lpr".
The screen reverts to DP-2500 Properties.
Check that the "Print to the following port:"was
changed as entered, and click on the Apply button
first and then on the
button. If an error occurs
button.
OK
15