Panasonic DP-2000 Operating Instructions Manual page 71

Binding Margin
Select for ensuring the binding margin upon duplex printing.
Specifying On for Binding moves a printing area vertically or horizontally (for ensuring binding margin). For
specifying a margin in consideration of a double-page spread printing on application, specify Off for Binding.
Width of binding margin is specified on the main unit. (See page 30, copy section)
Staple
Specifying staple printing is allowed if the output bin is set to outer.
Note 1) Staple printing is allowed only with the Electronic Sorting Board (DA-ES200 : For DP-2000 only)
and 1-Bin Finisher (DA-FS200) mounted.
Note 2) Paper is stapled at the top left or at the top right. (See table below.)
Document orientation
Letter
A4
Letter/A4
Ledger
Legal
A3
FLS
B4
Ledger/Legal/
A3/FLS/B4
Installation and Configuration (Windows 2000)
Paper orientation
Letter
A4
Letter/A4
Letter
A4
Letter/A4
Ledger/Legal/
A3/FLS/B4
Stapling position
Top left
Letter
A4
Letter
A4
Note) Stapling on Invoice/B5 sheet is not
allowed.
Letter/A4
Top left
Letter/A4
Note) Stapling on Invoice/B5 sheet is not
allowed.
Ledger
Legal
A3
FLS
B4
Note) Stapling on Invoice/B5 sheet is not
allowed.
Top left
Ledger/Legal/
A3/FLS/B4
Note) Stapling on Invoice/B5 sheet is not
allowed.
Top right
Top right
Top right
71