Card Functions Screen; Meta Data Screen - Panasonic AG-3DA1E Operating Instructions Manual

Setup menu list (continued)
DISPLAY SETUP screen (continued)
Item
CARD &
BATTERY
OTHER
DISPLAY
LCD/EVF
BACKLIGHT

CARD FUNCTIONS screen

Item
CARD
FORMAT
CLIP
PROPERTY

META DATA screen

Item
CARD READ
RECORD
USER CLIP
NAME
CLIP COUNT
RESET
META DATA
PROP
META INITIAL
SET
8
Display
mode
(Camera) Select ON to display the remaining SD Memory Card recording capacity and
remaining battery charge.
ON OFF
(Camera) Select how much information to display on the viewfinder and the LCD
monitor. (Page 74)
ON OFF
(Camera) Adjusts the backlight of the LCD monitor and viewfinder. Select HIGH for
brighter backlight.
LOW, NORMAL, HIGH
Display
mode
(Camera) Formats the SD Memory Card.
YES: Formats the card.
NO: Returns to the last screen.
• Be sure to insert the two SD Memory Cards.
(PB) Displays information about the selected clip.
YES: Displays clip information.
NO: Returns to the last screen.
Display
mode
(Camera) Loads the metadata recorded on the SD Memory Card into the unit.
YES NO
• Be sure to insert the two SD Memory Cards.
• "NO FILE" is displayed when no metadata is recorded in the SD Memory
Card.
(Camera)
Sets whether to record the metadata to be loaded into the unit simultaneously
on an SD Memory Card.
ON: Records simultaneously.
OFF:
Does not record simultaneously.
(Camera) Selects the method of USER CLIP NAME recording.
TYPE1: User clip name is the same as the CLIP NAME if there is no
uploaded metadata or data.
TYPE2: User clip name is the same as the CLIP NAME if no combination of
data and COUNT value is uploaded, or if there is no uploaded data.
(Camera) Resets the COUNT value to 1.
YES NO
(Camera) Displays the metadata which has been recorded in the unit.
YES NO
(Camera) Initializes the metadata which has been recorded in the unit. All the settings
including the ON or OFF setting for RECORD are now cleared.
YES NO
Description of settings
Description of settings
Description of settings
indicates the factory setting.