Panasonic U-4LE1E5 Service Manual page 75

2. Detailed Settings Function
Item code Item
Automatic drain pump
operation
Ventilation fan operation
Wired remote controller
sensor
"Operation change
control in progress"
display
Discharge temperature
control
Heat exchanger
temperature for cold air
discharge
(Heat exchanger control
point for control to
prevent cold air)
Fan output switching
Drain pump delayed
start time
Humidifier setting
Flap operation mode
Flap swing mode
No.
0000 No forced operation
0001 Forced operation for 1 minute
0060 Continuous operation
0000 None
0001 Ventilation fan operated by remote controller.
0000 Not used. (Body sensor is used.)
0001 Remote control sensor is used.
0000 Normal (displayed)
0001 Not displayed
0000 Discharge temperature control OFF
0001 Discharge temperature control ON
0013 Control temperature 13°C
0014 Control temperature 14°C
0025 Control temperature 25°C
0026 Control temperature 26°C
0000 Output linked with fan. (ON when indoor unit fan is operating.)
0001 Fan mode operation output
0000 No delayed start
0001 1 second delayed start
0002 2 seconds delayed start
0058 58 seconds delayed start
0059 59 seconds delayed start
0060 60 seconds delayed start
0000 Humidifier output OFF. Drain pump stopped.
0001 Humidifier output ON. Drain pump operates.
Humidifier output ON. Drain pump operates for 1 minute when total humidifier
0002
operating time reaches 60 minutes.
0003 Humidifier output ON. Drain pump stopped.
0000 Standard setting
0001 Draft reduction mode (Flap lower-limit position is shifted upwards.)
0000 Smudging reduction mode (Flap swing upper-limit position is shifted downwards.)
0001 Normal mode
0002 Draft reduction mode (Flap swing lower-limit position is upwards.)
4 - 13
Remote Controller Functions
Setting data
Description
1 minute delayed start
Except
2 minutes delayed start
Indoor unit
Type
58 minutes delayed start
U1, F2,
59 minutes delayed start
T1, E1
60 minutes delayed start
Mini VRF SYSTEM
Indoor unit
4
Type
U1, F2,
T1, E1