Panasonic U-4LE1E5 Service Manual page 88

3. Remote Controller Servicing Functions
3. Remote Controller Servicing Functions
Sensor Temperature Relationship Table
Location where
sensor is installed
Indoor unit
Outdoor unit
*Room temp. controlled: = Controlled room temperature
•When body thermostat controlled:
Controlled room temperature = Indoor unit intake temp. (TA) – Intake temperature shift (*1)
•Remote control thermostat controlled:
4
Controlled room temperature = Remote controller temp.
*1 Intake temperature shift: This is the shift value considered the temperature difference between the upper area
and lower area of the room in heating mode.
It is the value of the code "06" in the indoor unit's EEPROM settings.
Cooling mode: = 0
Sensor
Sensor type
address
Room temp. controlled*
Remote controller
temp.
Indoor unit intake
temp. (TA)
Indoor unit heat exchanger
temp. E1 (E1)
—
Discharge temp. (TD)
High-pressure sensor
temp.
Suction temp. (TS)
Heat exchanger liquid (C1)
Outdoor air temp.
Sensor
address
4 - 26
Mini VRF SYSTEM
Mini VRF SYSTEM
Remote Controller Functions
Remote Controller Functions
Sensor type
Indoor unit heat exchanger
temp. E3 (E3)
Discharge air temp. (BL)
Discharge air temp. setting
Indoor unit MOV pulse (MOV)
—
—
Inverter primary current
MOV pulse (MOV)
—
Actual operating Frequency