Huawei eSpace 6805 Administrator's Manual page 37

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
Before you use the MWI service, make sure that SUBSCRIBE for MWI on the Accounts tab
page of the IP phone is enabled.
Configuring the Time on an IP Phone
Perform the following steps to obtain the network time through NTP:
1.
Figure 2-18 NTP Server
2.
Figure 2-19 Time Zone
eSpace 6805, eSpace 6810,eSpace 6830, eSpace 6850, and eSpace 6870 support the function
of obtaining time through DHCP. At this time, enable this function on the DHCP server. That
is, select Yes for the parameters following the parameters for setting the NTP server and for
setting the time zone.
Configuring the Manager and Secretary Service
eSpace 6805, eSpace 6810, eSpace 6830, eSpace 6850, and eSpace 6870 support the manager
and secretary service.
Issue 01 (2011-12-21)
Access the ADVANCED SETTINGS tab page on the Web page. Set the NTP server
address in the corresponding field.
In general, a computer using the Windows XP operating system, the SoftCo, or a router can act as an
NTP server to provide the time for IP phones.
If the deployed site is not in Beijing time zone, you can select a required time zone on
the BASIC SETTINGS tab page.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
2 Configuration and Loading Files
32