Huawei eSpace 6805 Administrator's Manual page 71

Huawei IP Phone eSpace
6805&6810&6830&6850&6870
Administrator Guide
ID
P38
P51
P87
P212
P192
P237
P145
P140
8
P194
P193
Issue 01 (2011-12-21)
Paramete Setting
r Example
Layer 3 12
QoS
802.1Q/V 0
LAN Tag
802.1p 0
priority
value
Upgrade 1
Via
Firmware 10.10.10.1
Server
Path
Config 10.10.10.1
Server
Path
Allow 1
DHCP
Option 43
and
Option 66
to
override
server
Disable 0
DHCP
Option248
Automatic 0
Upgrade
Automatic 1440
Upgrade
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
Description
The default value is admin.
Value of Layer-3 QoS.
The default value is 12.
802.1Q VLAN tag.
The default value is 0.
802.1P priority value.
The default value is 0.
Protocol used for upgrade.
 0: TFTP
 1: HTTP
 2: HTTPS
The default value is 1.
Firmware server address.
The default value is um.huawei.com/etphone.
Config server address.
The default value is um.huawei.com/etphone.
Indicates whether to enable the Option43 and
Option66 settings on the DHCP server.

0: No
 1: Yes
The default value is 1.
Indicates whether to disable DHCP Option248.

0: No
 1: Yes
The default value is 0.
Indicates whether to automatically upgrade phone
software.
 0: No
 1: Yes
The default value is 0.
Interval for checking new versions. This
parameter is valid only when Automatic Upgrade
is set to 1.
The unit is minute.
5 Appendix
66