Digital Indicator View - ABB SM1000 User Manual

4.5.5 Digital Indicator View

Short Channel Tag
Level Level
Current Value
Alarm Status
In Flow
Units
Temp
Recording Chart Bar Process
On
Digital view enable
Totalizer display enable
Menu enables
Digital menu enables
1. Message select enable
2. Alarm acknowledge enable
3. Totalizer reset enable
4. Totalizer stop/go enable
5. Channel select enable
Group 1
2.08
2.08
metres metres
578494
578494
m 3
m 3
204.4
l/hr
0005402801
m 3
195
°C
m 3
Digital
Archive
On
1 2 3 4 5
OK
28/03/00
14:52:00
Pressure
4
2.08
metres bar
578494
3
m
Out Flow
198.4
l/hr
0005402060
3
m
Alarm 1
On
Set to 'On', to allow the Digital Indicator View to be selected
for display by the operator.
Note. This view is displayed only if the Totalizer option
is fitted.
Set to 'On' to add the channel totalizer value and units to the
indicator displays (if the totalizer for that channel is enabled).
Select the menu items to be accessible from the Digital Indicator
view.
Message select enable
Allows the Operator to activate one of six pre-configured
messages.
Alarm acknowledge enable
Allows the Operator to acknowledge any alarms associated
with the current group.
Totalizer reset enable
Allows the Operator to reset the totalizer value to the preset
totalizer value on any or all channels.
Totalizer stop/go enable
Allows the Operator to start and stop the totalizer.
Channel select enable
Allows the Operator to display or hide individual channels.
Notes.
• Menu items that are not enabled appear greyed-out on
the Digital Indicator View menu.
• Totalizer menu options can be enabled only if the totalizer
option is fitted.
4 CONFIGURATION...
Channel Units
Totalizer Units
Totalizer Value
Note. Displayed only
totalizer option is fitted and
totalizers enabled for display.
if
45