Functions; Custom Linearizers - ABB SM1000 User Manual

4.8 Functions

Common
Group 1
Channels 1.1 - 1.6
Group 2
Channels 2.1 - 2.6
Functions
I/O Modules
Exit

4.8.1 Custom Linearizers

Linearizer RTA 1 RTA 2
Adjust custom linearizer 1
Adjust custom linearizer 2
Adjust custom linearizer 1
x% y%
5.0 5.0
10.0 10.0
15.0 15.0
20.0 20.0
25.0 25.0
30.0 30.0
35.0 35.0
40.0 40.0
45.0 45.0
Fig. 4.18 Functions Configuration
RTA 3 RTA 4
0
Functions
Linearizer RTA 1
Adjust custom linearizer 1
Adjust custom linearizer 2
Use the and
highlight the point to be modified.
Use the key to open the digipad to change the position
of the point.
Select the key to return to the Adjust custom linearizer
screen.
100
Select the key to return to the Functions screen
Each linearizer has 20 breakpoints. Both X and Y values are
set as percentages.
Custom linearizers can be applied to any analog input by
selecting them as the linearizer type for that input – see
Section 4.6.2.
0
100
4 CONFIGURATION...
RTA 2 RTA 3 RTA 4
and the and keys to
67