Table of Contents
Advertisement
Quick Links
Download this manual
See also:
User Manual
Advertisement
Table of Contents
Related Manuals for Haier HWO60S4
Summary of Contents for Haier HWO60S4
- Page 1 INSTALLATION INSTRUCTIONS Built-in Oven HWO60S4 models NZ AU 591028 A / 1104975-ß1 07.15...
-
Page 2: Safety And Warnings
The models shown in this installation guide may not be available in all markets and are subject to change at any time. For current details about model and specification availability in your country, please go to our website listed on the cover or contact your local Haier dealer. -
Page 3: Product Dimensions
PRODUCT DIMENSIONS FRONT SIDE Product Dimensions Overall height* of product Overall width of product overall depth of product (excluding handle and knobs) Height of chassis Width of chassis Depth of chassis Depth of oven frame and control panel (=distance between front of chassis and front of oven door, excl. knobs) depth of oven door when fully open Electrical supply 16-20 mm... -
Page 4: Cabinetry Dimensions
CABINETRY DIMENSIONS Electrical supply 16-20 mm min. 2.5 mm SIDE Cabinetry Dimensions Minimum inside width of cavity Overall width of cavity Inside height of cavity Overall height of cavity Minimum inside depth of cavity Note: If installing a cooktop above the oven, ensure adequate clearance is provided for the cooktop as per the cooktop manufacturer’s instructions. -
Page 5: Prior To Installation
PRIOR TO INSTALLATION Before you install the oven, make sure that the benchtop and oven cavity are square and level, and are the required dimensions ● ● the installation will comply with all clearance requirements and applicable standards and regulations ●... - Page 6 Do not seal the oven into the cabinetry with silicone or glue. This makes future servicing 230-240 V~ 2350-2550W ● ● difficult. Haier will not cover the costs of removing the oven, or of damage caused by 230-240 V~ 3095-3370W this removal. Model code...
-
Page 7: Final Checklist
FINAL CHECKLIST TO BE COMPLETED BY THE INSTALLER Make sure the oven is level and securely fitted to the cabinetry and the oven door opens and closes freely. Make sure all the internal packaging has been removed from the oven cavity. Make sure all oven vents and openings are clear and are free of any obstruction/damage. - Page 8 Copyright © Fisher & Paykel/Haier 2015. All rights reserved. The product specifications in this booklet apply to the specific products and models described at the date of issue. Under our policy of continuous product improvement, these specifications may change at any time. You should therefore check with your Dealer to ensure this booklet correctly describes the product currently available.