Brother MFC-5460CN User Manual page 53

Printing (Continued)
Difficulty
Stains appear on the reverse side
or at the bottom of the page.
The machine prints dense lines on
the page.
The printouts are wrinkled.
Cannot perform '2 in 1 or 4 in 1'
printing.
Print speed is too slow.
Machine feeds multiple pages
Printed pages are not stacked
neatly.
Printed pages double-feed and
cause a paper jam.
Machine does not print from Paint
Brush.
Machine does not print from Adobe
Illustrator.
The machine cannot print full
pages of a document.
Out of Memory message
occurs.
Printing Received Faxes
Difficulty
Condensed print and white streaks
across the page or the top and
bottom of sentences are cut off.
Vertical black lines when receiving. The sender's scanner may be dirty. Ask the sender to make a copy to see if the
Received colour fax prints only in
black and white.
Left and Right margins are cut off or
a single page is printed on two
pages.
46
Suggestions
Make sure the printer platen is not dirty with ink.
Make sure you are using the paper support flap. (See Loading paper, envelopes
and other media on page 6.)
Check Reverse Order in the Basic tab of the printer driver.
In the printer driver Basic tab, click the Settings, and uncheck the
Bi-Directional Printing.
Check that the paper size setting in the application and in the printer driver are the
same.
Try changing the printer driver setting. The highest resolution needs longer data
processing, sending and printing time. Try the other quality settings in the printer
driver Basic tab. Also, click the Settings tab, and make sure you uncheck Colour
Enhancement.
Turn the borderless feature off. Borderless printing is slower than normal printing.
®
(See Printing for Windows
Make sure the paper is loaded properly in the paper tray. (See Loading paper,
envelopes and other media on page 6.)
Check that more than two types of paper are not loaded in the paper tray at any
one time.
Make sure you are using the paper support flap. (See Loading paper, envelopes
and other media on page 6.)
Make sure you pull out the paper support until it clicks.
Try setting the Display setting to '256 colours'.
Try to reduce the print resolution. (See Printing for Windows
-
User's Guide on the CD ROM.)
Reduce the printing resolution. (See Printing for Windows
-
Guide on the CD ROM.)
Reduce the complexity of your document and try again. Reduce the graphic
quality or the number of font sizes within your application software.
Suggestions
You probably had a bad connection, with static or interference on the telephone
line. Ask the other party to send the fax again.
problem is with the sending machine. Try receiving from another fax machine.
Replace the colour ink cartridges that are empty or nearly empty, and then ask the
other person to send the colour fax again. (See Replacing the ink
cartridges on page 57.)
Turn on Auto Reduction.
in the Software User's Guide on the CD
-
ROM.)
®
in the Software
®
in the Software User's