Brother MFC-5460CN User Manual page 59

Color photo inkjet all-in-one flatbed with networking
Hide thumbs Also See for MFC-5460CN:
Table of Contents

Advertisement

Error Message
Cause
One or more of the ink cartridges is
Ink Empty XX
empty. The machine will stop all
print operations. While memory is
available, black and white faxes will
be stored in the memory. If a
sending machine has a colour fax,
the machine's
that the fax be sent as black and
white. If the sending machine has
the ability to convert it, the colour
fax will be stored in the memory as
a black and white fax.
Low Temperature The print head is too cold.
The memory card is either
Media Error
corrupted, incorrectly formatted, or
there is a problem with the memory
card.
One or more of the ink cartridges
Near Empty XX
are running out of ink. If a sending
machine has a colour fax, the
machine's
the fax be sent as black and white.
If the sending machine has the
ability to convert it, the colour fax
will be received into memory as a
black and white fax.
An ink cartridge is not installed
No Cartridge
properly.
The memory card in the media
No File
drive does not contain a .JPG file.
The machine is out of paper or
No Paper Fed
paper is not properly loaded in the
paper tray.
The paper is jammed in the
machine.
The number you dialled does not
No Response/Busy
answer or is busy.
Not Registered You tried to access a Speed Dial
number that is not programmed.
52
'
'
handshake
will ask
'
'
handshake
will ask that
Action
Replace the ink cartridges. (See Replacing the
ink cartridges on page 57.)
Allow the machine to warm up.
Put the card firmly into the slot again to make
sure it is in the correct position. If the error
remains, check the media drive by putting in
another memory card that you know is working.
Order a new ink cartridge.
Take out the ink cartridge and put it in again
seating it properly. (See Replacing the ink
cartridges on page 57.)
Put the correct memory card into the slot again.
Do one of the following:
Refill the paper in the paper tray, and then
press Mono Start or Colour Start.
Remove the paper and load it again and then
press Mono Start or Colour Start.
See Printer jam or paper jam on page 55.
Verify the number and try again.
Set up the Speed Dial number. (See Storing
Speed-Dial numbers on page 20.)

Advertisement

Table of Contents
loading

Table of Contents