Control Panel - Panasonic Panaboard UB-7320 Operating Instructions Manual

■ Control panel

Contrast Indicator
Contrast Key
Panel Name
Contrast
Indicator
Contrast
Key
Copy Key
Multi-Copy/
Error
Indicator
Multi-Copy/
Stop Key
Advance
Key
Reverse
Key
Advance Key
Copy Key
This lamp indicator displays the printing contrast used during
copying.
Indicator off: Normal printing contrast
Indicator on: Darker than normal printing contrast
Each time this key is pressed, the unit will alternate between
normal and dark contrast modes (Normal/Dark).
This key causes the screen to be copied.
This indicator displays the number of copies to be made. The
display changes each time the Multi-Copy/Stop Key is pressed.
Example: 1 → 2 → ··· → 9 →
(Selecting " " allows you to copy 4 screens continuously.)
When an error occurred, a flashing symbol will appear in this
display to indicate the error status. (See page 24.)
When making multiple copies or copying 4 screens continuously,
press this key until the desired number of copies or " " is
displayed on the Multi-Copy/Error Indicator. This key can also be
pressed to stop copying while executing multiple copies or
copying 4 screens continuously.
• The display changes as shown below each time the screen is copied. After
reaching 0, the display will reset to 1.
Example for multiple copies:
5 → 4 → 3 → 2 → 1 → 0 → 1 (Number is counted down.)
Example for copying 4 screens continuously:
→ → →
Pressing this key advances the screen from right to left.
Pressing this key twice advances two screens from right to left.
Pressing this key more than 2 seconds advances the screen to
the projector screen with no ruled lines.
Pressing this key advances the screen from left to right.
Pressing this key twice advances two screens from left to right.
Pressing this key more than 2 seconds advances the screen to
the projector screen with no ruled lines.
Part Names and Functions
Reverse Key
Multi-Copy/Error Indicator
Description
→ 1 → ···
→ 0 → 1 (Display changes.)
Multi-Copy/Stop Key
9