Advertisement
Headset volume is
too low
Headset
microphone
volume is too low
No audio is heard
through the
headset speakers
The headset is not
functioning based
on the
configuration
selected
No sound effect
change when
switching the
Equalizer or
surround sound
function in the
application
Master
speaker
volume or
application
volume is set
too low
Master
microphone
volume or
application
volume is set
too low
Headset not
set as the
default
speaker on
the computer
Application is
no longer
running on
the computer
or a different
configuration
is active in the
application
Application is
not properly
installed
After plugging in the headset, adjust
1.
the speaker volume using Control
Panel -> Sounds in your computer.
Adjust the speaker volume in the
2.
application you are using to play
music or make VoIP calls.
1. After plugging in the headset, adjust
the microphone volume using
Control Panel -> Sounds in your
computer.
2. Adjust the microphone volume in
the application you are using to
make VoIP calls.
Unplug and then plug in the headset
1.
USB cable into your computer.
Set the headset as the default
2.
speaker using Control Panel ->
Sounds -> Playback Devices in your
computer.
Make sure that the application is
1.
running on your computer as
indicated by the SteelSeries icon in
your system tray.
Open the application and make sure
2.
that the active configuration for
your headset is set properly.
Reinstall the application.
1.
17
Advertisement
