Philips 200P7ES/00 Service Manual page 26

200P7 LCD
26
Go to cover page
Step 5: Write DDC data
1. Configuration should be as Fig. 31. And press OK.
2. Access Factory Mode
- Turn off monitor.
- [Push AUTO " " & OK "
hold it ] + [Press power "
screen"] => then release all button
3. Click (Write EDID) icon from the tool bar to write DDC data.
Step 6: Save DDC data
Sometimes, you may need to save DDC data as a text file for using
in other IC chip. To save DDC data, follow the steps below:
1. Click (Save) icon (or click "file"-> "save as") from the tool bar
And give a file name as shown in Fig. 32.
The file type is EDID46 file (*.ddc) which can be open in WordPad.
By using WordPad, the texts of DDC data & table (128 bytes, hex
code) can be modified. If DDC TEXTS & HEX Table are completely
correct, it can be saved as .ddc flie to re-load it into DDC IC for DDC
Data application.
200P7
2. Click Save .
Step 7: Exit DDC program
Pull down the File menu and select Exit as shown in Fig. 33.
Edid45.1
DDC Instructions
Fig. 31
" buttons at the same time and
" button untill comes out "Windows
Fig. 32
Fig. 33
Serial Number Definition
BZ000501000001
SERIAL NO
YEAR/WEEK
BZ CODE(TY--CHUNGLI,VN--HUNGARY(SZR),
According to the ECO-CA005743,serial number definition of
200P7ES/00,200P7EB/00,200P7EB/27,200P7EB/75 has been
changed like below:
BOM Code
Panel Supplier CODE
AUO 1
CPT 2
LPL(LG)
3
QDI
4
CMO 5
B Z 3 A 0 6 0 1 0 0 0 0 0 1
BZ--SUZHOU,DS--DONG GUAN)
SERIAL NO
YEAR/WEEK
SERVICE VERSION CHANGE CODE
BOM CODE(BILL OF MATERIAL)CODE
SITE CODE(PRODUCTION CENTER)
BZ CODE(AR-CZECH REPUBLIC
VN-HUNGARY(SZR),BZ-SUZHOU
DS-DONGGUAN)