Page 1
User Manual ED65E ED75E EM65E EM75E DC32E DC40E DC48E DC55E DC32E-M DC40E-M DC48E-M DC55E-M DC40E-H DC48E-H The color and the appearance may differ depending on the product, and the specifications are subject to change without prior notice to improve the performance.
Table of contents Before Using the Product Remote Control (RS232C) Using MDC Cable Connection Copyright Connection MDC Program Installation/Uninstallation Control Codes Installation Safety Precautions Uninstallation Symbols Connecting to MDC Cleaning Storage Using MDC via RS-232C Connecting and Using a Source (serial data communications standards) Electricity and Safety Device...
Page 3
Table of contents Broadcasting Network Advanced Settings Auto Program Network Status Dynamic Contrast Antenna Network Settings Black Tone Flesh Tone Network type Channel List RGB Only Mode Network Settings (Wired) Mode Color Space Network Setting (Wireless) White Balance WPS(PBC) Guide Motion Lighting Wi-Fi Direct Schedule Manager...
Page 4
Clock Software Update General Sleep Timer Update now On Timer Max. Power Saving Off Timer Game Mode Contact Samsung Holiday Management Auto Power On Safety Lock Eco Solution Button Lock Energy Saving Playing photos, videos and music Standby Control Eco Sensor...
Page 5
Optimum Picture Quality Supported music file formats Prevention of Afterimage Burn-in Supported Video Formats License Terminology Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Testing the Product Checking the Resolution and Frequency Check the followings. Q & A Specifications...
Safety Precautions Cleaning ― Exercise care when cleaning as the panel and exterior of advanced LCDs are easily scratched. ― Take the following steps when cleaning. Caution ― The following images are for reference only. Real-life situations may differ from what is shown in the images.
Storage Connect the power plug to a grounded power socket (type 1 insulated devices only). Due to the characteristics of high-glossy products, using a UV humidifier nearby may create white- • An electric shock or injury may result. colored stains on the product. ―...
THE PRODUCT. DO NOT INSTALL THE PRODUCT NEAR HEAT SOURCES. • A fire may result. Only use the power cord provided with your product by Samsung. Do not use the power cord with other products. • A fire or electric shock may result.
Page 10
Bend and keep part of the outdoor TV antenna cable hanging downwards Edible oil, such as soybean oil, can damage or deform the product. Do not (the part inside the room) to prevent rainwater from entering the product. install the product in a kitchen or near a kitchen counter. •...
If the product is dropped or the outer case is damaged, turn off the power SAMSUNG switch and disconnect the power cord. Then contact Samsung Customer • Be sure to consult Samsung Customer Service Center if you want to Service Center. install the product at such a place.
Page 12
• Be sure to power off the product and disconnect the power cord when water or other foreign substances have entered the product. Then contact Samsung Customer Service Center. Do not move the product by pulling the power cord or any cable.
Page 13
Caution Rest your eyes for more than 5 minutes for every 1 hour of product use. • Eye fatigue will be relieved. Leaving the screen fixed on a stationary image for an extended period of time may cause afterimage burn-in or defective pixels. •...
Page 14
Be careful that children do not place the battery in their mouths when removed from the remote control. Place the battery in a location that children or infants cannot reach. • If children have had the battery in their mouths, consult your doctor immediately.
Chapter 02 Preparations Checking the Components Components - Contact the vendor where you purchased the product if any ― Components may differ in different locations. components are missing. - The pictures may look different from the actual components. - A stand is not provided with the product. To install a stand, you can purchase one Warranty card separately.
Parts ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. Buttons Description Control Panel Power on the product. If you press the button when the product is turned on, the control menu will be displayed.
Page 17
Buttons Description ― If you press the button on the panel key when the product is turned on, the control menu will be displayed. Select the connected input source. Control menu Source Move the panel key right to select in the control menu. When the list of Source input sources is displayed, move the panel key left or right to select the desired input source.
Reverse Side Port Description HDBT IN Sends the HDMI signal to a connected LAN cable using an HDBaseT transmitter. ― The color and shape of parts may differ from what is shown. Specifications are ― EME models are only supported. subject to change without notice to improve quality.
Port Description Reverse Side AUDIO OUT Connects to the audio of a source device. ― The color and shape of parts may differ from what is shown. Specifications are subject to change without notice to improve quality. AV IN / COMPONENT IN Connects to a source device using the AV/Component adapter.
Anti-theft Lock ― An anti-theft lock allows you to use the product securely even in public places. ― The locking device shape and locking method depend on the manufacturer. Refer to the user guide provided with your anti-theft locking device for details. ―...
Remote Control ― Using other display devices in the same space as the remote control of this product can cause the other display devices to be inadvertently controlled. ― A button without a description in the image below is not supported on the product. Power off the product.
Page 22
Display information about the current input Quickly select frequently used functions. source. Move to the upper, lower, left or right menu, or adjust an option's setting. Confirm a menu selection. Exit the current menu. Return to the previous menu. Manually select a connected input source from PC, DVI, HDMI.
• Make sure to install the specified wall mount. Switching between portrait and landscape ― Contact Samsung Customer Service Center for further details. • To use the product vertically (portrait), turn it clockwise so that the LED is pointing down.
We recommend you contact a technician for assistance when installing the wall mount bracket. Samsung Electronics is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall mount on your own.
Samsung is not liable for these kinds of accidents. • Samsung is not liable for product damage or personal injury when a non-VESA or non-specified wall mount is used or the consumer fails to follow the product installation instructions.
Page 27
LAN Cable (DCE, DCE-M, DCE-H Model Only) • RS232C cable Connector: 9-Pin D-Sub to Stereo Cable • Pin assignment 1 2 3 4 5 6 7 8 -P2- -P1- -P1- -P1- -P2- -P2- Male type ---------- STEREO ---------- PLUG Pin No Standard Color Signal ----------...
Page 28
Cross LAN cable (PC to PC) • Connector : RJ45 Direct LAN cable (PC to HUB) RJ45 RJ45 RJ45 MDC Signal Signal <--------> <--------> Signal Signal <--------> <--------> <--------> <--------> <--------> <-------->...
Connection • Connection 2 (DCE / DCE-M / DCE-H Model) ― Ensure you connect each of the adapters to the correct RS232C IN or OUT port on the product. • Connection 1 (EDE / EME Model) RJ45 RJ45 RS232C RS232C RS232C RS232C •...
Command type Command Value range Control Codes Video Wall On 0x84 Viewing control state (Get control command) Video Wall User Control 0x89 Header Command Data length Checksum • All communications take place in hexadecimals. The checksum is calculated by adding up all 0xAA Command type values except the header.
Power control Volume control • Function • Function A product can be powered on and off using a PC. The volume of a product can be adjusted using a PC. • Viewing power state (Get Power ON / OFF Status) •...
Page 32
Input source control 0x24 HDMI2_PC • Function 0x55 HDBT The input source of a product can be changed using a PC. ― DVI_video, HDMI1_PC(HDMI_PC) and HDMI2_PC cannot be used with the Set command. They only • Viewing input source state (Get Input Source Status) respond to "Get"...
Page 33
Screen mode control • Nak Header Command Data length Ack/Nak r-CMD Val1 Checksum • Function The screen mode of a product can be changed using a PC. 0xAA 0xFF 0x18 "ERR" Screen mode cannot be controlled when the Video Wall function is enabled.
Page 34
PIP On/Off control Auto adjustment control (PC and BNC only) • Function • Function The PIP mode of a product can be turned on or off using a PC. Automatically adjust the PC system screen using a PC. ― Only available on models that have the PIP function. •...
Page 35
Video Wall Mode Control Safety Lock • Function • Function Video Wall mode can be activated on a product using a PC. PC can be used to turn the Safety Lock function on or off on a product. This control is only available on a product whose Video Wall is enabled.
Page 36
Video Wall On • Nak Header Command Data length Ack/Nak r-CMD Val1 Checksum • Function Turn Video Wall on or off on the product from your computer. 0xAA 0xFF 0x84 • Get Video Wall On/Off Status "ERR": A code showing what error has occurred Header Command Data length...
Page 38
Wall_SNo: Product Number code assigned to the product 10x10 Video Wall Model : ( 1 ~ 100) Set Number Data 0x01 0x02 0x63 0x64 • Ack Header Command Data length Ack/Nak r-CMD Val1 Val2 Checksum 0xAA 0xFF 0x89 Wall_Div Wall_SNo •...
Chapter 03 Connecting and Using a Source Device Before Connecting Connecting to a PC Check the following before you connect this product with other devices. Devices that can be connected • Do not connect the power cable before connecting all other cables. to this product include PCs, camcorders, speakers, set top boxes and DVD/Blu-ray Disc players.
Connection using a DVI cable (Digital type) Connection Using an HDMI-DVI Cable ― When you connect a PC to the product using an HDMI-DVI cable, set Edit Name DVI PC to access video and audio content stored on the PC. DVI IN / MAGICINFO IN HDMI IN...
Connecting to a Video Device • Do not connect the power cable before connecting all other cables. Ensure you connect a source device first before connecting the power cable. • You can connect a video device to the product using a cable. ―...
Connection Using an HDMI-DVI Cable ― Audio will not be enabled if the product is connected to a video device using an HDMI-DVI cable. To resolve this, additionally connect an audio cable to the audio ports on the product and video device. When you connect a video device to the product using an HDMI-DVI cable, set Edit Name DVI Devices...
Connecting to an Audio System Connection Using an HDMI Cable Using an HDMI cable or HDMI to DVI Cable (up to 1080p) ― Connecting parts may differ in different products. • For better picture and audio quality, connect to a digital device using an HDMI cable. •...
Connecting the Antenna Connecting the LAN Cable ― DCE, DCE-M models are only supported. ― DCE, DCE-M, DCE-H models are only supported. ― Connecting parts may differ in different products. ― Connecting parts may differ in different products. ― When the product is powered on for the first time, basic settings are configured automatically. Take extra care to ensure the wires inside the antenna cable are not bent.
Connecting the HDBase-T ― EME models are only supported. ― Connecting parts may differ in different products. ― HDBase-T (Tx) transmits data from an external device to HDBase-T (Rx). Make sure to connect them directly using a LAN cable. ― Data transmission is not available if HDBase-T (Rx) is connected to HDBase-T (Tx) through a hub. ―...
Changing the Input source Source allows you to select a variety of sources and change source device names. You can display the screen of a source device connected to the product. Select a source from source list to display the screen of the selected source.
Chapter 04 Using MDC Multiple display control "MDC" is an application that allows you to easily control multiple display devices simultaneously using a PC. - For details on how to use the MDC program, refer to Help after installing the program. The MDC program is available on the website. MDC Program Installation/Uninstallation In the displayed "Ready to Install the...
Connecting to MDC Using MDC via RS-232C (serial data communications standards) An RS-232C serial cable must be connected to the serial ports on the PC and monitor. ― EDE, EME models are only supported. Monitor 1 RS232C IN RS232C OUT Monitor 2 Computer...
Using MDC via Ethernet Enter the IP for the primary display device and connect the device to the PC. Display devices can be connected to each other using a LAN cable. Connection using a direct LAN cable ― Multiple products can be connected using the RJ45 port on the product and the LAN ports on the HUB. ―...
Advanced Color Management. · Contrast - To download the Advanced Color Management program, visit www.samsung.com/displaysolutions. · Brightness If the input source is TV, AV, Component, HDMI(AV) ·...
Backlight / Contrast / Brightness / Your product has several options for adjusting picture quality. Input source Picture Mode Adjustable options Sharpness / Color / Tint (G/R) PC, DVI, HDMI, HDBT Information Advertisement Backlight Contrast Brightness (when a PC is connected) Sharpness MENU m →...
Apply • MENU m → → → ENTER E Picture Calibrated Value ― To download the Advanced Color Management program, visit www.samsung.com/displaysolutions. ― If Picture Mode is set to Calibration, Calibrated Value is disabled. Picture ― DCE-M, DCE-H models are only supported.
Picture Size Picture Size If you have a cable box or satellite receiver, it may have its own set of screen sizes as well. However, we highly recommend you use your product’s 16:9 mode most of the time. MENU m → →...
Position Adjusts the picture position. Position is only available if Picture Size is set to Zoom1, Zoom2, Wide Fit, Screen Fit. ― To use the Position function after selecting Zoom1, Zoom2, Wide Fit Screen Fit follow these steps. Press the d button to select Position. Press the E button. Picture Size Press the u or d button to move the picture up or down.
Resolution Select If the picture is not normal even when the resolution of the graphics card is one of the following, you can optimize the picture quality by selecting the same resolution for the product as the PC using this menu. Available resolutions: 1024x768 1280x768...
PC Screen Adjustment Coarse Fine • Removes or reduces picture noise. Coarse If the noise is not removed by Fine-tuning alone, use the function to adjust the frequency as best as possible (Coarse) and Fine-tune again. After the noise has been reduced, re-adjust the picture so that it is aligned with the center MENU m →...
PIP Settings The picture from the external video source will be in the main screen and the picture from the product will be in the PIP sub- picture screen. MENU m → → → ENTER E Picture Main picture Sub picture Picture Component, PC, DVI, HDMI, MagicInfo...
Advanced Settings Input Source Picture Mode Advanced Settings PC, DVI, HDMI, MagicInfo, Information White Balance HDBT (when a PC is connected) MENU m → → → ENTER E Picture Advanced Settings Advertisement White Balance Advanced Settings TV, AV, Component, DVI, Dynamic Not available HDMI,...
Dynamic Contrast Advanced Settings Adjust the screen contrast. Dynamic Contrast Medium Medium High • Black Tone Black Tone Flesh Tone Select the black level to adjust the screen depth. RGB Only Mode Dark Darker Darkest • Color Space Native Flesh Tone White Balance Flesh Tone.
Picture Options Select an option using the u and d arrow keys, and the press E. Use the arrow keys to change the setting, and then press E. Input source Picture Mode Picture Options MENU m → Picture → Picture Options →...
Color Tone Picture Options If the input source is PC, DVI, HDMI, MagicInfo, HDBT (PC connection). Color Tone Standard Cool Standard Warm • If the input source is AV, Component, DVI, HDMI, HDBT or TV. Color Temp. 10000K Cool Standard Warm1 Warm2 •...
HDMI Black Level Auto Motion Plus ― EDE, EME models are only supported. Selects the black level on the screen to adjust the screen depth. Normal Removes blur and judder from scenes with larger amounts of rapid movement to provide a clearer •...
Picture Off The product screen is turned off but the audio will continue. Press any key on your remote to turn the screen back on. MENU m → Picture → Picture Off → ENTER E Picture Picture Off Reset Picture - The displayed image may differ depending on the model.
Chapter 06 Sound Adjustment Sound Configure the sound ( ) settings for the product. Sound Mode You can select a sound mode to suit your personal preferences. • Standard: Selects the normal sound mode. • Music: Emphasizes music over voices. MENU m →...
Sound Effect Configure your preferred sound effect for output sound. ― If Speaker Select is set to External, Sound Effect is disabled. ― Available only when Sound Mode is set to Standard. MENU m → Sound → Sound Effect → ENTER E DTS TruSurround HD (Off / On) •...
Speaker Settings Speaker Select (External Internal / Receiver) • If you are listening to the sound track of a broadcast or movie through an external receiver, you may hear a sound echo caused by the difference in decoding speed between the products speakers and the speakers attached to your audio receiver.
Chapter 07 Broadcasting Broadcasting Configure the settings for the product. Broadcasting is only available on the DCE, DCE-M models. Auto Program Auto Program function memorizes all channels that are available over the air or through your cable system and adds them to the Channel List.
Antenna Before your television can begin memorizing the available channels, you must specify the type of signal source that is connected to the LED display. Cable • MENU m → Broadcasting → Antenna → ENTER E Broadcasting Antenna Cable - The displayed image may differ depending on the model. - Available in mode only.
Channel List Register or delete channels. Add favorite channels or rename analog channels. Select a desired channel from Channel List to view the channel instantly. ― To navigate Channel List faster, press the channel buttons. The channel list changes page by page. MENU m →...
Guide Guide provides an overview of each digital channel's program lineup. You can check the program schedules and set up a Schedule Manager. ― The information in the Guide is for digital channels only. Analog channels are not supported. MENU m → Broadcasting →...
Edit Channel Manage channels saved on your TV. Delete channels, re-register deleted channels or rename analog channels. ― Conveniently configure settings using the remote control buttons displayed at the bottom of the screen. Icons found in the edit channel page MENU m →...
Page 73
Editing registered channels Locking/unlocking channels using a password Pressing TOOLS from the Edit Channel page displays the following menu items. Provided functions may Lock specific channels to prevent children from accessing inappropriate content. vary depending on the broadcast signal. ― To set a password, make sure Program Rating Lock is set to On.
Edit Favorites Creating a favorite channel list Edit Channel Set frequently viewed channels as favorite channels. Favorite channels are indicated by a symbol in the Channel List page. A maximum of five favorite channel lists are allowed. Create different favorite channel lists for each family MENU m →...
Page 75
Viewing channels saved under a favorite channel list Deleting channels from a favorite channel list ― Favorite channel lists are only displayed if they have been created previously. Delete channels from a favorite channel list, if required. When changing the channel using the channel buttons, channels saved in favorite channel lists can only Change Fav.
Page 76
Renaming a favorite channel list Change the name of a favorite channel list, if required. Change Fav. Select from the screen to change the favorite channel list on the right to another desired favorite channel list. Press TOOLS on the screen. Sub-menu items are displayed. Rename Favorites Select from the sub-menu items.
Channel Settings Fine Tune (analog channels only) MENU m → Broadcasting → Channel Settings → ENTER E If the reception is clear, you do not have to fine tune the channel, as this is done automatically during the search and store operation.
Audio Options Preferred Language (for digital broadcasts) MENU m → Broadcasting → Audio Options → ENTER E Use the up and down arrow keys to select a language, and then press E. Digital-TV broadcasts can simultaneously transmit many audio tracks (for example, simultaneous translations of the program into foreign languages).
Program Rating Lock When turned on, the Program Rating Lock feature can automatically block programs that you deem inappropriate for your children. You must enter a PIN (personal identification number) before you can set or change any of the Program Rating Lock restrictions.
Page 80
Canadian English Rating: You can block TV programs based on their Anglophone Canadian rating. • Canadian English Rating displays a column with locks and the following ratings categories. C: Programming intended for children under age 8. / C8+: Programming generally considered acceptable for children 8 years and over to watch on their own. / G: General programming, suitable for all audiences.
Caption Caption You can switch the caption function on or off. MENU m → Broadcasting → Caption → ENTER E If captions are not available, they will not be displayed on the screen. • Broadcasting ― The Caption HDMI feature does not work with devices connected to the product through the input jacks.
Digital Caption Options (digital channels only) Configure the subtitle settings such as size and color. Adjusts the each option. When done, select Close. • Size: Options include Default, Small, Standard and Large. The default is Standard. Font Style: Select the caption fonts. •...
Chapter 08 Network Network is only available on the DCE, DCE-M, DCE-H models. Network Status Network Settings MENU m → Network → Network Status → ENTER E MENU m → Network → Network Settings → ENTER E You can check the current network and Internet status. Configure network settings to use various smart hub features such as Internet search, content sharing through a home network and feature updates.
Network Settings (Wired) • Depending on how your network is configured, you may be able to attach your product to your LAN by connecting the LAN port on the back of your product directly to a network wall outlet using a LAN cable.
Page 85
Set the network connection to use Internet services such as perform software upgrades. In the pop-up menu that appears, click Status. Automatic Network Settings (Wired) On the dialog that appears, click the Support tab. Connect to the network using a LAN cable. On the Support Tab, click the Details button.
― If the router cannot be found after retrying, select the Stop button. WEP, TKIP or TKIP AES (WPS2Mixed) on your AP or wireless router, Samsung products will not support a Add Network button appears. connection in compliance with new Wi-Fi certification specifications.
Page 87
How to set up manually When done, use the right arrow button to move the cursor to Done, and then press E. The network connection screen appears and the verification process starts. Network type Wireless Network Settings from the page. ―...
When done, select at the bottom of the page, and then press E. The network test screen appears and the verification process starts. When the connection has been verified, the “Your wireless network and Internet connection are setup and ready to use.”...
Wi-Fi Direct AllShare Settings MENU m → Network → Wi-Fi Direct → ENTER E MENU m → Network → AllShare Settings → ENTER E ― To use this function, your mobile device should be supported by the Wi-Fi Direct. Shows a list of mobile phones or connected devices which have been set up to use the AllShare Play function with this product.
Server Network Settings Device Name MENU m → → → ENTER E MENU m → → → ENTER E Network Server Network Settings Network Device Name Select or enter a device name. Connect to Server This name can be shown on network remote controls over the network. User Input [Signage]Display 1 •...
Chapter 09 Applications Source List Refresh MENU m → → → TOOLS → → ENTER E Applications Source List Refresh Source allows you to select a variety of sources and change source device names. Refresh If you cannot find a device you want, select to refresh the list.
MagicInfo Lite MagicInfo is a business solution that allows the product to be used as a signage (advertising media). Using the solution, play image and video files from the internal memory or a connected USB storage device. ― DCE, DCE-M, DCE-H models are only supported. MENU m →...
Available features in the MagicInfo page Device : All Content : All Sort by : File Name Options MagicInfo list page provides the following features. Device • - Select either Internal to search for a desired device list. Internal Content •...
Page 94
Settings Default Storage Select the storage location that you want to download scheduled channels from the network to. Settings Internal • Select the storage location that you want to download scheduled channels from Repeat Mode the network to. Set repeat mode whether to repeat playing contents or not. Default Storage Internal •...
Chapter 10 System Setup Go through the initial setup steps like you did the first time you used this product. ― Enter your 4 digit PIN number. The default PIN number is “0-0-0-0". If you want to change the PIN number, use the Change PIN function.
Menu Language MENU m → → → ENTER E System Menu Language Set the menu language. ― A change to the language setting will only be applied to the onscreen menu display. It will not be applied to other functions on your PC. Multi Control MENU m →...
Time You can configure Clock Set Sleep Timer. You can also set the product to automatically turn on or off at a specified time Timer using the function. Clock MENU m → → → ENTER E System Time Set the current year, date and time. Time ―...
Sleep Timer Time Automatically shuts off the product after a preset period of time. Clock (Off 30 min. 60 min. 90 min. 120 min. 150 min. min.) ― Use the up and down arrows to select a period of time, and then press E. To cancel Sleep Timer Sleep Timer, select Off.
Off Timer Time Timer) by making a selection from one of the seven options. (Off Timer 1 Off Timer Set the off timer (Off Clock ― You must set the clock before you can use Timer. Sleep Timer • Setup: Select Off, Once, Everyday, Mon~Fri, Mon~Sat, Sat~Sun or Manual.
Eco Solution Energy Saving Reduce the power consumption by adjusting the screen brightness. MENU m → → → ENTER E System Eco Solution Medium High • Eco Sensor Eco Solution To enhance your power savings, the picture settings will automatically adapt to the light in the room. Energy Saving •...
Auto Protection Time If the screen displays a still image for a certain period of time you define, the product activates the screen saver to prevent the formation of burnt in ghost images on the screen. 2 hours 4 hours 8 hours 10 hours •...
Screen Burn Protection To reduce the possibility of screen burn, this unit is equipped with Pixel Shift screen burn prevention technology. Pixel Shift moves the picture slightly on the screen. Pixel Shift Time setting allows you to program the time between movements of the picture in minutes. MENU m →...
Timer Screen Burn Protection You can set the timer for Screen Burn Protection. Pixel Shift Screen Burn Protection feature stops automatically after a specified period of time. Timer Timer Immediate Display • • Repeat: Display the image retention-preventive pattern set in Mode at specified time intervals(Period).
Immediate Display Screen Burn Protection Select the screen saver you want to display immediately. Pixel Shift Pixel Rolling Bar Fading Screen • Timer Side Gray Immediate Display When the screen is set to aspect ratio, adjust the brightness of white margins on sides to protect the screen. Side Gray Light Dark...
Ticker Input text while a video or image is displayed and display the text on the screen. • ― Message, Time, Position, Motion, and Font Style are enabled only when Ticker is set to On. MENU m → System → Ticker →...
Video Wall Customize the layout of multiple displays that are connected to form a video wall. In addition, display part of a whole picture or repeat the same picture on each of the connected multiple displays. To display multiple images, refer to MDC Help or the MagicInfo user guide. Some models may not support the MagicInfo MENU m →...
Vertical Video Wall This function automatically divides the screen according to the specified number of vertical displays. Video Wall Enter the number of vertically arranged displays. The vertical screen will automatically be divided according to the number entered. · Format Full A maximum of 15 displays can be assigned to the vertical arrangement.
Source AutoSwitch Settings Turning on the display with Source AutoSwitch On, and the previous video source selection is not active, the display will automatically search the different video input sources for active video. Source AutoSwitch MENU m → System → Source AutoSwitch Settings →...
Change PIN Change PIN screen will appear. Choose any 4 digits for your PIN and enter it in Enter New PIN. Reenter the same 4 digits in Confirm New PIN. When the Confirm screen disappears, press the Close button. The product has memorized your new PIN. MENU m →...
General Max. Power Saving Turns off the product to reduce power consumption after the PC has been left idle for a specified period of time. MENU m → System → General → ENTER E • ― Available only PC, DVI, HDMI mode.
Button Lock General This menu can be used to lock the buttons on the product. Max. Power Saving Only the remote control can control the product if Button Lock is set to On. • Game Mode Auto Power On Standby Control Safety Lock You can set the screen standby mode to be applied when an input signal is received.
Lamp Schedule General Adjusts the luminance to a user-specified value at a specified time. Lamp Schedule • OSD Display OSD Display Power On Adjustment 0 sec Displays or hides a menu item on the screen. Temperature Control Source OSD No Signal OSD MDC OSD •...
Anynet+ is a function that enables you to control all connected Samsung devices that support Anynet+ with your Samsung product remote. The Anynet+ system can be used only with Samsung devices that have the Anynet+ feature. To be sure your MENU m →...
Auto Turn Off Anynet+ (HDMI-CEC) Setting an Anynet+ Device to turn automatically when the product is turned off. Anynet+ (HDMI-CEC) • ― If Auto Turn Off is set to Yes, running external devices will turn off at the same time as the product powers off. Auto Turn Off ―...
Troubleshooting for Anynet+ Problem Possible Solution Anynet+ does not work. • Check if the device is an Anynet+ device. The Anynet+ system supports Anynet+ devices only. • You can connect only one receiver (home theater). • Check if the Anynet+ device power cord is properly connected. •...
Page 116
Problem Possible Solution The connected device is not • Check whether or not the device supports Anynet+ functions. displayed. • Check whether or not the HDMI cable is properly connected. • Check whether Anynet+ (HDMI-CEC) is set to in the Anynet+ System menu.
Clone to USB ― The option is available for products with the same Model Code Software Version. Support → Contact Samsung Model Code Software Version. Go to and find the product Clone from USB - The displayed image may differ depending on the model.
Reset All MENU m → System → Reset All → ENTER E This option returns all the current settings for a display to the default factory settings. DivX ® Video On Demand MENU m → → → ENTER E System DivX®...
― When you upgrade software, all video and audio settings you have made will return to their default settings. We advise you to write down your settings so that you can easily reset them after the upgrade. Update now Update the software to the latest version. Contact Samsung MENU m → → → ENTER E...
• Before connecting a USB device to the product, back up files to ensure your data is not damaged or lost. Samsung Electronics is not liable for any damage or loss of data. • Do not remove a USB device while it is loading.
Page 121
Compatible devices with media play • Some USB digital cameras, smartphones and audio devices may not be compatible with the product. • Media play is only compatible with USB MSC devices. • MSC device refers to a Mass Storage Class Bulk-Only Transport device. Examples of MSC devices include Thumb drives, Flash card readers and USB HDDs.
Using a USB device Connecting a USB device It is recommended to use a USB HDD that has a power adapter. Turn on your product. Connect a USB device containing photo, music and/or movie files to the USB port on the back or side panel of the product. New device connected.
Menu items in the media content list page Option Name Operations Photos Videos Music Slide Show Start a slideshow. ― This menu item is not available if Sort by is set to Folder. Encoding Select an encoding language if the title of media content appears corrupted. Play Selected Select and play desired content from the media content list.
Available buttons and features during photo playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. Previous Next • Pressing the INFO button while a file is View the previous or next photo. selected will display information about the selected file.
Available buttons and features Option Name Operations during video playback Picture Mode Change the Picture Mode. Sound Mode Change the Sound Mode. Pressing the E or TOOLS button displays the following buttons. The RETURN Audio Language Play a video using a desired language. This feature only activates when a streaming file that button makes the buttons disappear.
Available buttons and features during music playback Pressing the E or TOOLS button displays the following buttons. The RETURN button makes the buttons disappear. Pause Play • Pause or play music. Rewind Fast forward • Rewind or fast forward music. Speed up playback up to 3x, if required. To play the previous music file, select ∂ twice. Previous Next •...
Supported music file formats File Extension *.avi, *.mkv, *.asf, *.wmv, *.mp4, *.3gp, *.vro, *.mpg, *.mpeg, *.ts, *.tp, *.trp, *.mov, *.flv, *.vob, *.svi, *.divx Supported Video Formats • Video content will not play, or not play correctly, if there is an error in the content or the container. •...
Page 129
Container Video Codec Resolution Frame rate Bit rate Audio Codec (fps) (Mbps) 3gpp DivX 3.11 /DivX4.X 1280 x 720 XVID ADPCM H.264 BP/MP/HP DTS Core HE-AAC MPEG-4 SP/ASP LPCM WINDOW MEDIA VIDEO V9 MPEG2 MPEG1 H.263 DivX5.x DivX6.X...
Page 130
Container Video Codec Resolution Frame rate Bit rate Audio Codec (fps) (Mbps) 3gpp DivX 3.11 /DivX4.X 1920 x 1080 XVID ADPCM H.264 BP/MP/HP DTS Core MPEG-4 SP/ASP HE-AAC LPCM WINDOW MEDIA VIDEO V9 MPEG2 MPEG1 H.263 DivX5.x DivX6.X MOTION JPEG 640 x 480...
Chapter 13 Troubleshooting Guide Requirements Before Contacting Samsung Customer Service Center Before calling Samsung Customer Service Center, test your product as follows. If Testing the Product the problem persists, contact Samsung Customer Service Center. Check if your product is operating normally by using the product test function.
Check the followings. Installation issue (PC mode) The screen keeps switching on and off. Check the cable connection between the product and PC, and ensure the connection is secure. Blank spaces are found on all four sides of the screen when The blank spaces found on the screen have nothing to do with the product.
Page 133
Screen issue The screen is not clear. The screen is blurry. Adjust Coarse and Fine. Remove any accessories (video extension cable, etc) and try again. Set the resolution and frequency to the recommended level. The screen appears unstable and shaky. Check that the resolution and frequency of the PC and graphics card are set within a range compatible with the product.
Page 134
Lines (red, green or blue) are displayed on the screen. These lines are displayed when there is a defect in DATA SOURCE DRIVER IC on the monitor. Contact a Samsung Service Center to resolve the issue. The display looks unstable and then freezes.
Page 135
Sound issue There is no sound. Check the connection of the audio cable or adjust the volume. Check the volume. The volume is too low. Adjust the volume. If the volume is still low after turning it up to the maximum level, adjust the volume on your PC sound card or software program.
Page 136
Sound issue There is audible sound when the volume is muted. When Speaker Select is set to External, the volume button and mute function are disabled. Adjust the volume for the external speakers. Audio settings for main speakers are separate from the internal speakers on the product. Changing or muting the volume on the product does not affect an external amplifier(decoder).
Page 137
Other issue Caption is grayed out and not selectable. If the selected input source is not TV, Caption cannot be selected from the Channel menu. Small particles are found on the edges of the product. The particles are part of the product design. The product is not defective. menu is not available.
Page 138
Other issue The IR sensor is not functioning. Make sure the sensor light turns on when a button is pressed on the remote control. • If the sensor light does not turn on, turn the power switch off and then on again on the back of the product.
Q & A Question Answer How can I change the frequency? Set the frequency on your graphics card. • Windows 7: Go to Control Panel → Appearance and Personalization → Display → Adjust resolution → Advanced Settings → Monitor and adjust the frequency in Monitor Settings. •...
Chapter 14 Specifications General Size Model Name ED65E / EM65E ED75E / EM75E Panel Size 65 CLASS (64.5 inches / 163 cm) 75 CLASS (74.5 inches / 189 cm) Display area 1428.48 mm (H) x 803.52 mm (V) 1650.24 mm (H) x 928.26 mm (V) Display area 56.2 inches (H) x 31.6 inches (V)
Page 141
― This is a class A product. In a domestic environment this product may cause radio interference in which case the user may be required to take adequate measures. ― For detailed device specifications, visit the Samsung Electronics website. (USA only) Dispose unwanted electronics through an approved recycler. To find the nearest recycling location, go to our website: www.samsung.com/recyclingdirect or call, (877) 278 - 0799...
Preset Timing Modes ― This product can be set to only one resolution for each screen size to obtain the optimum picture quality due to the nature of the panel. Using a resolution other than the specified resolution may degrade the picture quality. To avoid this, it is recommended that you select the optimum resolution specified for your product. Check the frequency when you exchange a CDT product (connected to a PC) for an LCD product.
Page 143
Resolution Horizontal Frequency Vertical Frequency Pixel Clock Sync Polarity (kHz) (Hz) (MHz) (H/V) VESA, 800 x 600 48.077 72.188 50.000 VESA, 800 x 600 46.875 75.000 49.500 VESA, 1024 x 768 48.363 60.004 65.000 VESA, 1024 x 768 56.476 70.069 75.000 VESA, 1024 x 768 60.023...
― When the service is requested, in spite of in warranty, we may charge you for a visit from a service • Use of supplies or separatly sold product unspecified by Samsung. technician in the following cases. • Repair from a person besides an engineer of outsourcing service company or partner of Samsung Electronics Co., Ltd. Not a product defect •...
Optimum Picture Quality and Afterimage Black Matrix Color-Filter Common Electrode (ITO) Burn-in Prevention Optimum Picture Quality Source Drain • Due to the nature of the manufacturing of this product, approximately 1 pixel per million (1ppm) may be brighter or darker on the panel. This does not affect product performance. - The number of sub-pixels by panel type: 6,220,800 •...
Page 146
Preventing afterimage burn-in • Regular Text color Change - Use bright colors of similar brightness. ― The best way to protect the product from afterimage burn-in is switching the power off or setting the Interval: Change text color and background color every 30 minutes PC or system to run a screen saver when not in use.
Open Source Licence Notice is written only English. Studio Sound is a trademark of DTS, Inc. ⓒ2012 DTS, Inc. All Rights Reserved. For information on the Open Source Licence Notice, contact the Samsung Customer Center or send email to oss.request@samsung.com.
Terminology 480i / 480p / 720p / 1080i / Non-interlace Mode and Interlace Vertical Frequency____ The product Component ports (green, blue and HDMI (High Definition Multimedia 1080p____ Each of the scanning Mode____ Non-interlace mode displays a single image many times red)____ The component ports, which Interface)____ It is an interface that rates above refers to the number of...