Chapter 2: System Description; System Specifications - GE Sievers InnovOx Operation And Maintenance Manual

Chapter 2. System Description

System Specifications

Analysis Modes
Dynamic TOC range
TOC LOD
TOC Accuracy
TOC Precision
TOC Linearity
Analysis time
TOC calibration stability
Particle diameters in sample
Ambient temperature range
Maximum relative humidity
Maximum altitude
Sample temperature range
Sample inlet pressure
1.
Stated analytical performance is achievable under controlled laboratory conditions that minimize
operator and standards errors.
GE Analytical Instruments ©2013
1
NPOC, TOC (TC - IC), TC, IC
Up to 50,000 ppm TOC
0.05 ppm NPOC
±3% of reading at 25 ppm NPOC or TOC
RSD  1.5% of reading at 25 ppm NPOC or TOC
2
 0.995, measured as NPOC
R
2.6 to 8.3 minutes in Online mode
Up to 6 months
200 µm diameter without filtration.
Filter Panel
10 to 40 °C (50 - 104 °F)
Up to 95%, non-condensing
3,000 m
10 to 60 °C (50 - 140 °F)
125 psig maximum with provided control valve
0.5 psig minimum without optional sample pump
49 of 238
>
200 µm with optional
DLM 68100-06 EN Rev. A