Sony SRS-X11 Help Manual page 98

Help Guide
Troubleshooting
Personal Audio System
SRS-X11
Initializing the speaker
With the speaker turned on, press and hold the VOL (volume) – button, the VOL (volume) + button and the
PAIRING button at the same time for more than five seconds until the speaker turns off.
The speaker is initialized. Settings such as volume, etc., are restored to the factory default settings, and all pairing
information is deleted.
Note
To turn on the speaker after initializing it, connect the speaker to a computer/AC outlet. If the speaker is being
powered by the built-in battery, it cannot be turned on.
4-568-649-11(1)
Copyright 2015 Sony Corporation
(power)
94