There are five possible operating modes for every Gigaset M101/M105
Data:
1.
Direct
connection: this operating mode is implemented for all devices
that are not controlled with AT or AVM-compatible commands
2.
AT commands (PC)
mode for the local adapter. The Gigaset M105 Data unit determines the
conditions on the serial interface in the same way as a modem. In addition
to the data, the transmission parameters are also transmitted to the Re-
mote adapter which then transfers the data to the connected device.
3.
AT commands (device)
mode, the remote adapter controls a terminal that understands AT com-
mands.
A
Configuration program options
or
AVM compatible
or
AVM compatible
Back
(PC): this is the operating
(device): in this operating
23