What Happens If - Siemens M105 Operating Instructions Manual



What happens if...

If a malfunction occurs, check the following points:
z
The USB cable connections to the connected devices are fully insert-
ed.
z
The adapters are not too far apart and there are no large parts of build-
ings in between (see
z
Registration was successful.
When operating Gigaset 105 Data with Gigaset 101 Data:
z
The local adapter operating mode is set to
AVM compatible
Or:
z
The local adapter operating mode is set to
have set the direct connection transmission parameters in your com-
munication software.
If the malfunction persists after checking all the above points, call the hot-
line at 0180 5 333 220.
If you are in Austria and your unit
z
is connected to a single connection, contact the Siemens hotline at 01/
1707-5004
z
is connected to a telephone system, contact the relevant installation
company, e.g. Siemens Nebenstellenanlagen in Vienna, NÖ, Bgld. Tel-
ephone: 01/1705
Siemens Service should only be contacted if problems develop with the
device. Your specialist dealer will be happy to answer any questions con-
cerning unit operation. Contact your network operator/provider for ques-
tions concerning telephone connection.
Internet: www.siemens.com/ic/products/cd/deutsch/index/support/
pcsupport/download.htm#M105
A
"Place of installation" on page 21
(PC).
Back
What happens if...
).
AT commands (PC)
Direct connection and you
or
35