D-Link DIR-879 User Manual page 20

Section 3 - Installation - Router
4. Turn off and unplug the power and Ethernet cable to your cable or DSL broadband modem. This is required. In some
cases, you may need to turn it off for up to five minutes.
5. Use the included Ethernet cable to connect your modem to the yellow port labeled INTERNET on the router.
6. Turn on or plug your modem back in and wait approximately one minute before proceeding onward.
D-Link DIR-879 User Manual
DIR-879
DIR-879
DIR-879
Modem
Modem
Modem
16