Replacing The Side Access Panel - HP t505 Hardware Reference Manual

Replacing the Side Access Panel

To replace the access panel:
1.
Align the tabs on the access panel with the slots in the both sides of the chassis and place the
access panel on the side of the unit, offset about 8.3 mm (1/3 inch) toward the top of the unit (1).
2.
Slide the panel toward the front of the unit until the panel is flush with the bottom panel of the
chassis (2).
3.
Insert and fasten the two screws to secure the side access panel to the chassis.
Removing and Replacing the Side Access Panel
11