Rear Panel Components; Installing The Rubber Feet - HP t505 Hardware Reference Manual

Rear Panel Components

For more information, go to
the model-specific QuickSpecs.
Figure 1-2
(1) Ethernet RJ-45 connector
(2) Serial connectors (4)
(3) Parallel connector
(4) PS/2 connectors (2)

Installing the Rubber Feet

You may want to use your thin client in a horizontal orientation. You can install rubber feet on the left
side of the unit to help keep the unit safely in place.
To install the rubber feet:
1. Locate the VESA (Video Electronics Standards Association) holes in the left side of the thin client.
CAUTION:
slide and result in equipment damage.
2. Remove the feet from their backing.
http://www.hp.com
Rear panel components
If you use the thin client in a horizontal orientation without the rubber feet, it may
and search for your specific thin client model to find
(5) Cable lock slot
(6) Power connector
(7) VGA connector
(8) Universal serial bus (USB) connectors (2)
Rear Panel Components
3