Panasonic WJ-FS316 Operating Instructions Manual page 32

3. Still Spot Picture
The following function is available in MULTISCREEN
OUT picture only.
1. Repeat the procedures described above for Spot
Picture.
2. Press the STILL button to freeze the displayed picture.
The LED on the STILL button lights up, and the LED on
the pressed CAMERA SELECT button starts to blink.
The camera title and "STILL" (both blinking) alternate in
the display.
3. To cancel the still picture, press the STILL button
again.
The LED on the STILL button goes off and the selected
playback picture is displayed in spot mode.
STILL
4. Zoomed Spot Picture
The following function is available in MULTISCREEN
OUT picture only.
1. Repeat the procedures described above for Spot
Picture.
2. Press the EL-ZOOM button to display the zoomed pic-
ture. The "+" sign appears in the picture.
Note: The "+" sign disappears if no operation is per-
formed within approx. 5 seconds. If the "+" sign dis-
appeared, press the EL-ZOOM button again so that
the "+" sign appears in the picture.
32
STILL
EL-ZOOM
3. Press the cursor buttons (C, D, A, B) to move the
zoomed area within the picture.
4. Press the + button to zoom in, or – button to zoom out.
Notes:
• When the + button is pressed, the picture is
zoomed twofold.
• The picture cannot be zoomed out to be smaller
than the original size by pressing the – button.
5. To cancel this mode, press the EL-ZOOM button. The
selected picture is displayed in normal size in spot
mode.