Panasonic WJ-FS316 Operating Instructions Manual page 36

4. Multiscreen Playback Picture
1. Operate the VCR in playback mode.
2. Confirm that the LED on the VCR/CAM button is lit. If
the LED is not lit, press the VCR/CAM button so that the
LED on the VCR/CAM button lights.
3. Press the SPOT/MULTISCREEN button so that the LED
of SPOT/MULTISCREEN button goes off.
4. Press the MULTISCREEN SELECT button to select
multiscreen pattern (4-, 9- or 16-segment screen).
Note: 16-segment screen is not available for WJ-
FS309/FS409.
<WJ-FS309/FS409>
<WJ-FS316/FS416>
1 2
3 4
4-SEGMENT SCREEN
11
16-SEGMENT SCREEN
(Only for WJ-FS316/FS416)
5. Each time the MULTISCREEN SELECT button is
pressed, the multiscreen changes as follows:
WJ-FS309/FS409: 4 9 4 screen segments
WJ-FS316/FS416: 4 9 16 4 screen segments
Notes:
• This button does not function when recording.
• When ON is selected for QUAD SHIFT on the MON-
ITOR OUTPUT SETUP menu, pressing this button
changes the screen as follows:
WJ-FS309/FS409: 4A 4B 9 screen segments
WJ-FS316/FS416: 4A 4B 4C 4D 9 16
screen segments
• The 4A screen is a multiscreen with compressed
pictures of channels 1 through 4, the 4B of chan-
nels 5 through 8, the 4C of channels 9 through 12,
and the 4D of channels 13 through 16.
36
MULTI SCREEN
SELECT
MULTI SCREEN
SELECT
1 2
4 5
7 8
9-SEGMENT SCREEN
1 2 5 6
3 4 7 8
9 10 13 14
12 15 16
5. Still Multiscreen Playback Picture
1. Repeat the procedures described above for Multi-
screen playback picture.
2. Press the STILL button so that the LED of STILL lights
up.
STILL
3. Press the CAMERA SELECT buttons 1-16 (9) to freeze
the displayed picture. STILL blinks in the display.
4. To cancel the still picture, press the respective CAM-
ERA SELECT buttons or STILL button again.
6. Playback Multiscreen Sequence
1. Repeat the procedures described above for Multi-
3
screen playback pictures.
2. Press the SEQ button so that the LED of SEQ lights up.
6
9
A sequence of multiscreen pictures is displayed in the
order and dwell time selected for the SEQ MODE para-
meter in MULTI OUTPUT menu.
Note: Refer to the Sequence Setup on page 15 for
more details.
3. To cancel a sequence, press the respective CAMERA
SELECT buttons or MULTISCREEN SELECT button.
STILL
SEQ