2.3 Operating Page – Totalizer (Level 1)
These frames are only displayed if the totalizer function is enabled in the configuration
level – see Section 4.3.3
2145. 3
ACK-n
123456
rSt-n
•1 Totalizer stop/go and reset from these frames can be disabled – see
Section 4.3.3.
A digital input can also be used to start/stop or reset the totalizer – see Section
4.3.4
Process Variable
•1
To view the input value (in electrical units) press the
key.
Global Alarm Acknowledge (latch alarms only)
•1
Totalizer Value
When this frame is selected the current counter status
is displayed (
Stop/Start
Reset
To reset the totalizer, select
key.
Continued on next page.
2 OPERATOR MODE...
– alarm unacknowledged
UN-ACK.
ACK.
– acknowledged
or
t–GO
t-StOP
t–GO
– start totalizer
– stop totalizer
t-StOP
– reset totalizer
rSt-Y
rSt-n
– do not reset totalizer
).
rSt-Y
then press the
9