ABB COMMANDER 150 User Manual page 31

...4.4 Ranges and Passwords (Level 4)
rEt HI
100. 0
rEt LO
100. 0
CNt HI
•1 The retransmission range high and low values are automatically set to the
maximum allowed value when thermocouple or RTD is selected in the
configuration level – see Section 4.3.1. This value can be modified if required.
4 CONFIGURATION MODE...
Retransmission Range
The retransmission range defines the the engineering
range to be retransmitted.
High (20mA output)
•1
[–9999 to 99999 (in engineering units)]
Low (4mA output)
•1
[–9999 to 99999 (in engineering units)]
Continued on next page...
29