Before using your washing
machine for the first time
Preparing your
washing machine
10
Attention
The washing machine must have been installed
and connected properly (refer to Page 43).
i The washing machine was tested before leaving
the factory. To remove any water left over from
testing procedures, the first washing cycle should
be carried out without laundry in the machine.
q Turn the tap on.
q Pull out the detergent drawer all the way.
q Pour approx. 1 litre / 1 ¾ pt of water into
chamber II of the detergent dispenser.
q Half fill the measuring beaker with detergent and
pour into chamber II.
i Do not use any special detergents for delicates or
woollens (excessive foam).
q Close the detergent drawer.
q Close the washing machine door.
q Set the programme selector to Cottons 90 ºC.
M
q Press the
Start button.
The programme starts.
The programme ends when in the display the
programme duration is on 0 :
q Turn the programme selector to Off.