Aligning The Washing Machine - Bosch WFO2466GB Instruction Manual

Water drainage
Aligning the
washing machine
Caution
Do not bend or pull the water drainage hose.
Height difference between the placement area and
drainage point: Maximum 100 cm.
Drainage into a siphon:
q Secure the connection point with a hose band clip
of 24-40 mm diameter (from specialist stores).
Drainage into a wash basin:
Caution
The plug must not block the drain of the wash basin.
q Secure the water drainage hose so that it does not
slide out.
q When water is being drained, check that the water
flow is fast enough.
Level the washing machine with the assistance of the
four adjustable feet and a spirit level:
q Loosen the lock nut 1 using the wrench.
q Adjust the height by rotating the foot 2.
q Tighten the lock nut 1 against the housing.
Simultaneously hold the foot in place and do not
adjust the height.
All four feet must be firmly on the floor. The washing
machine must not wobble.
The lock nuts of all four appliance feet must be
screwed tightly against the housing!
Attention
Loud noise generation, vibrations and "wandering"
may be due to incorrect alignment!
51