Signal Sound/Signal Beep; Button Operation); The Car Navigation System (In Future Use) - Panasonic CQ-DVR909U Operating Instructions Manual

Indicates pressing a button.
SIGNAL
Signal Sound/Signal Beep (The sound of button operation)
SEL
You can select to have different signal sounds output from the center speaker whenever
you press a button. You can also set the volume of the signal sound.
SIGNAL SOUND
SIGNAL BEEP 1
SIGNAL BEEP 2
SIGNAL BEEP 3
SIGNAL BEEP OFF
Adjusting the volume:
: Increases the volume
: Decreases the volume
(Adjustable range: LEV 1 to LEV 3)
MUTING
Making It Easier to Hear Voice Directions from the Car Navigation System
SEL
(In future use)
You can select to have this unit reduce its volume when the car navigation system is
giving voice directions.
Connect a car navigation system (sold separately).
MUTING ON
MUTING HALF
MUTING OFF
≥ When the car navigation system gives voice directions, the message "MUTING £££",
indicating the navimute setting, is displayed.
Indicates pressing a button
for an extended period of time.
Sets the operation sound as <Signal Sound>
(a different sound for each operation).
Sets the operation sound as <Signal Beep 1>.
Sets the operation sound as <Signal Beep 2>.
Sets the operation sound as <Signal Beep 3>.
Turns off the operation sound.
P•SET
X W
X W
DISC
(Main unit:
Decreases the volume of this unit to "0" (silence) when the car navigation
system gives voice directions.
Decreases the volume of this unit by approximately 1/10 when the car
navigation system gives voice directions.
Does not change the volume of this unit when the car navigation system
gives voice directions.
Note:
≥ A sound is output when the power is turned
on or off only if "SIGNAL SOUND" is set.
)
CQ-DVR909U
E
N
G
L
I
S
H
28
47