Troubleshooting - Panasonic CQ-DVR909U Operating Instructions Manual

Troubleshooting

Troubleshooting
Maintenance
E
N
Your product is designed and manufactured to ensure the minimum of maintenance. Use a soft cloth for
G
routine exterior cleaning. Never use benzine, thinner or other solvents.
L
I
S
When Something Doesn't Work
H
Check the chart for possible causes and solutions to the problem you might be experiencing. Some simple
47
checks or minor adjustments may eliminate the problem.
Product Servicing
If the suggestions in the charts don't solve the problem, we recommend that you take it to your nearest
authorized Panasonic Servicenter. The unit should be serviced only by a qualified technician.
Replacing the Fuse
Use fuses of the same specified rating (15 amps). Using different substitutes or fuses with higher ratings,
or connecting the unit directly without a fuse, could cause fire or damage to the stereo unit.
If the replacement fuse fails, contact your nearest Panasonic Servicenter for service.
Error Display Messages
DVD/Video CD/CD
Display
E1 PLS EJECT
E2 PLS EJECT
E3 PLS EJECT
PAL/NTSC ERR
REGION ERR
PLS VER UP
66
CQ-DVR909U
Cause
≥ Either the disc is dirty, or
upside down.
≥ Either the disc is scratched or
has some other problems. The
disc is not playable.
The unit will not operate for
some reason.
An attempt was made to play a
PAL disc.
An attempt was made to play a
disc with a region number that
was not "1" or "ALL".
The unit will not operate for
some reason.
Check/Remedy
Press [<] and check the disc.
Eject the disc. If the disc does
not eject when you press [<],
then simply press the reset
switch.
Press [<] and check the disc.
Press [<] and check the disc.
Eject the disc. If the disc does not
eject when you press [<], then
simply press the reset switch.If the
unit still does not operate, contact
your nearest Panasonic Servicenter
for service.