Panasonic AJ-SD930BE Operating Instructions Manual page 53

CONTENTS
Setup menus
USER menu
<V BLANK>
No./Item
800 For selecting the mode for recording signals
on additional lines.
ADD LINE 25
0000 OFF : No signals are recorded on
0001 YC422 : The 422 mode signals are
0002 YC411 : The 411 mode signals are
0003 Y1_B/W : Only the Y signal is recorded on
0004 Y1_BPF : Only the Y signal is recorded on
0005 C1 : Only the C signal is recorded on
0006 Y2_B/W : Only the Y signal is recorded on
0007 Y2_BPF : Only the Y signal is recorded on
0008 C2 : Only the C signal is recorded on
<Notes>
OWhen a setting from "0001 (YC422)" to "0008
(C2)" is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording line or lines can be selected.
To return from the sub-screen, press the STOP
button again.
OThe setting takes effect when the system
format is 25 Mbps.
Sub-screen
00 For selecting the additional line where the
REC LINE1 signals are to be recorded.
[625i system] [525i system]
0000 7L 0000
: :
0015 22L 0012
0016 320L 0013
: : 0014
0031 335L
0032 623L 0025
The underlined items indicates the initial setting.
Description
additional lines.
recorded on 1 line.
recorded on 1 line.
1 line directly.
1 line after it has been separated
from the C signal.
1 line.
2 lines directly.
2 lines after it has been
separated from the C signal.
2 lines.
10L
: :
22L
263L
273L
: :
284L
0026 525L
No./Item
Sub-screen
01 For selecting the additional line where the
REC LINE2 signals are to be recorded.
[625i system] [525i system]
0000 7L 0000
: :
0015 22L 0012
0016 320L 0013
: : 0014
0018 322L
: : 0016
0031 335L
0032 623L 0025
<Note>
This menu item is not displayed when additional
line mode setting "1" through "5" has been
selected.
Description
SD955B
10L
: :
22L
263L
273L
: :
275L
: :
284L
0026 525L
53 (E)