Panasonic AJ-SD930BE Operating Instructions Manual page 54

CONTENTS
Setup menus
USER menu
<V BLANK>
No./Item
801 For selecting the mode for recording signals
on additional lines.
ADD LINE 50
0000 OFF : No signals are recorded on
0001 YC422 : The 422 mode signals are
0002 Y4_B/W : Only the Y signal is recorded on
0003 Y4_BPF : Only the Y signal is recorded on
0004 C4 : Only the C signal is recorded on
<Notes>
OWhen a setting from "0001 (YC422)" to "0004
(C4)" is selected and the STOP button is
pressed, operation transfers to the sub-screen,
and the recording lines can be selected.
To return from the sub-screen, press the STOP
button again.
OThe setting takes effect when the system
format is 50 Mbps.
Sub-screen
00 For selecting the additional line where the
REC LINE1 signals are to be recorded.
[625i system] [525i system]
0000 7L 0000
: :
0015 22L 0012
0016 320L 0013
: : 0014
0031 335L
0032 623L 0025
01 For selecting the additional line where the
REC LINE2 signals are to be recorded.
[625i system] [525i system]
0000 7L 0000
: :
0015 22L 0012
0016 320L 0013
: : 0014
0018 322L
: : 0016
0031 335L
0032 623L 0025
The underlined items indicates the initial setting.
54 (E)
Description
additional lines.
recorded on 2 lines.
4 lines directly.
4 lines after it has been
separated from the C signal.
4 lines.
SD955B
10L
: :
22L
263L
273L
: :
284L
0026 525L
SD955B
10L
: :
22L
263L
273L
: :
275L
: :
284L
0026 525L
No./Item
Sub-screen
02 For selecting the additional line where the
REC LINE3 signals are to be recorded.
[625i system] [525i system]
0000 7L 0000
: :
0003 10L 0003
: :
0015 22L 0012
0016 320L 0013
: : 0014
0031 335L
0032 623L 0025
<Note>
This menu item is not displayed when setting "1"
has been selected as the additional line mode.
03 For selecting the additional line where the
REC LINE4 signals are to be recorded.
[625i system] [525i system]
0000 7L 0000
: :
0015 22L 0012
0016 320L 0013
: : 0014
0019 323L
: : 0017
0031 335L
0032 623L 0025
<Note>
This menu item is not displayed when setting "1"
has been selected as the additional line mode.
802 For selecting the type of teletext signals to be
SD955B
recorded.
TELETEXT
SEL 0000 MOJI : MOJI system
0001 NABTS : NABTS system
<Notes>
OThis setup menu is not displayed in the 625i
system.
OVITC signals are often mistakenly detected as
teletext signals when the NABTS system has
been selected.
If this happens, select MANU as the setting for
setup menu No. 803 (TELETEXT DET), then
select the line for teletext signals.
Description
SD955B
10L
: :
13L
: :
22L
263L
273L
: :
284L
0026 525L
SD955B
10L
: :
22L
263L
273L
: :
276L
: :
284L
0026 525L