Panasonic LK-T Relays Specification Sheet

11.0
24.0
.433
.945

SPECIFICATIONS

Contact
Arrangement
Initial contact resistance
(By voltage drop 6 V DC 1 A)
Contact material
Nominal switching
capacity
Max. switching power
Rating
Max. switching voltage
(resistive load)
Max. switching current
Min. switching capacity
(Reference value)
Mechanical (at 180 cpm)
Expected life
Electrical (at 20 cpm)
(min. operations)
(at rated load)
Coil
Nominal operating power
#1 This value can change due to the switching frequency, environmental conditions,
and desired reliability level, therefore it is recommended to check this with the
actual load.
Remarks
* Measurement at same location as "Initial breakdown voltage" section.
1
* 2 Detection current: 10mA
Wave is standard shock voltage of ±1.2 × 50μs according to JEC-212-1981
*
3
* 4 Excluding contact bounce time.
Half-wave pulse of sine wave: 11 ms; detection time: 10 μs
* 5
* Half-wave pulse of sine wave: 6 ms
6
Detection time: 10 μs
* 7
* The upper operation ambient temperature limit is the maximum temperature that
8
can satisfy the coil temperature rise value. Refer to 1. Usage, transport and
storage conditions in NOTES on page 3.
TYPICAL
APPLICATIONS
• Audio visual equipment
• Flat TVs and audio equipment, etc.
• Office equipment
• Home appliances
ds_61113_0004_en_lkt: 091008J
SLIM POWER RELAY
WITH HIGH INRUSH
CURRENT CAPABILITY
FEATURES
1. High inrush current capability
1) Operating load capability:
25.0
inrush 118 A, steady 8 A
.984
2) UL/C-UL TV-8 approved
2. High insulation resistance
1) Creepage distance and clearances
between contact and coil: Min. 6 mm
inch (In compliance with IEC65)
2) Surge withstand voltage between
contact and coil: 10,000 V or more
1 Form A
Max. 100 mΩ
AgSnO
2
5 A 277 V AC
1,385 V A
277 V AC
8 A (120V AC)
#1
100 mA, 5 V DC
10 6
10 5
250 mW

ORDERING INFORMATION

Contact arrangement
1a: 1 Form A
UL/C-UL, TÜV, SEMKO, TV-8 approved type is standard.
Notes: 1. Standard packing Carton: 100 pcs. Case: 500 pcs.
2. 3 V, 6 V, and 18 V DC types are also available. Please consult us for details.
TV-8 CERTIFIED
Characteristics
Max. operating speed
Initial insulation resistance*
Initial * 2
type
breakdown
voltage
Initial surge voltage between contact
and coil*
3
Operate time*
(at nominal voltage)
Release time (without diode)*
(at nominal voltage)
Temperature rise (at 70°C)
Shock
resistance
Vibration
resistance
Conditions for operation,
transport and storage*
(Not freezing and
condensing at low
temperature)
Unit weight
Ex. LKT 1a
Protective construction
F: Flux-resistant type
LK-T RELAYS
3. High noise immunity realized by the
card separation structure between
contact and coil
4. Conforms to the various safety
standards
UL, C-UL, TÜV, and SEMKO approved
.236
20 cpm (at rated load)
Min. 1,000 MΩ (at 500 V DC)
1
Between open
1,000 Vrms for 1 min.
contacts
Between contact
4,000 Vrms for 1 min.
and coil
4
Max. 15ms (at 20°C 68°F)
4
Max. 5ms (at 20°C 68°F)
Max. 35°C with nominal coil
voltage and at 5 A contact
Functional* 5 200 m/s
Destructive* 1,000 m/s
6
Functional*
7
at double amplitude of 1.5mm
Destructive
at double amplitude of 1.5mm
Ambient
temp.
8
Humidity
Air
pressure
F 12V
LK-T
10,000 V
carrying current
(resistance method)
2 {approx. 20 G}
{approx. 100 G}
2
10 to 55Hz
10 to 55Hz
–40°C to +70°C
–40°F to +158°F
5 to 85% R.H.
86 to 106 kPa
Approx. 12 g .42 oz
Coil voltage(DC)
5, 9, 12, 24V
1