Panasonic WJ-SX650 Operating Instructions Manual page 76

Function
System Status Display
• Opens System Status
Display.
• Closes System Status
Display.
Alarm History Display
<While displayed>
• Goes to the next or previous
page.
• Skips to 10 pages forward.
• Skips to 10 pages back.
Alarm Acknowledgement
(ACK)
<During alarm ACK>
• Displays the next alarm pic-
ture.
• Displays the previous alarm
picture.
• Alarm recover
Alarm reset
• Alarm individual reset
• Alarm monitor reset
• Alarm all reset
Alarm suspension
76
WV-CU950/650
Open "System Status" main
menu. →
[F1]
[F2]
[ALM RECALL]
• [+] or [–]
• Joystick CDAB
• Shuttle ring clockwise
• Zoom wheel controller to the
right
• Shuttle ring counterclock-
wise
• Zoom wheel controller to the
left
[ACK]
[+]
[–]
[SHIFT] + [ACK]
[ACK] (During alarm ACK)
[ALM RESET]
[SHIFT] + [ALM ALL RESET]
[SHIFT] + [ALM SUSPEND]
WV-CU360C/CJ
[OSD] + [SYS S]
[OSD] + [SYS S]
[OSD] + [ALM H]
• [NEXT] or [PREV]
• Joystick CDAB
Not available
Not available
[ACK]
[NEXT]
[PREV]
Not available
[ACK] (During alarm ACK)
[RESET]
[SHIFT] + [ALL RESET]
[SHIFT] + [SUSPEND]
Note
WV-CU950/650, WV-
CU360C/CJ:
Every pressing the buttons
can display or hide Alarm
History Display.
Note: Alarm History Display is
not available on monitors
in the alarm mode or dur-
ing recorder selection.
WV-CU950/650, WV-
CU360C/CJ:
If Display Mode is set to OFF,
an alarm will not be acknowl-
edged. The alarm will be
reset by every pressing the
ACK button.
Every pressing these buttons
will activate or cancel alarm
suspension.