Panasonic DBS 824 Manual page 111

Call Transfer
2. Dial the extension number to which the call is to be transferred.
3. When your call is answered, inform the third party of the transfer.
4. Press the PROG key or dial "8."
5. Hang up to complete the transfer.
Related Programming
• FF1 (System): Onhook Transfer
• FF1 (System): Extension Transfer Recall Timer for CO Calls
• FF1 (System): Extension Transfer Recall Timer for Intercom Calls
• FF1 (System): Attendant Transfer Recall Timer for CO Calls
• FF1 (System): Attendant Transfer Recall Timer for Intercom Calls
Considerations
• The Attendant can transfer calls while the handset is still in place, even if
• You cannot transfer a call to an extension that has Do Not Disturb or
3-24
• The line LED for the outside line on hold flashes green.
• The phone issues intercom dial tone.
• "Hold TRK #XX" (where "XX" is the line number) appears on the
display.
• The EXT LED stops flashing and remains lit.
• "Talk-EXT XXX" (where "XXX" is the extension) appears on the
display.
• The line LED for the original outside line turns red.
• "TRF XXX TRK #YY" (where "XXX" is the extension and "YY" is
the line) appears on the display.
• The third party need only pick up the handset to speak to the outside
line.
the system is not set for Onhook Transfer.
Absence Message activated.
DBS 824-3.0/3.2-700
Key Telephone Features
Revised April 2000