Call Park - Panasonic DBS 824 Manual

Call Park

Related Programming
• FF1 (System): Non-appearing Central Office Line Hold
• FF1 (System): Recall Timer for Extension-Held Intercom Calls
• FF1 (System): Recall Timer for Extension-Held CO Calls
• FF1 (System): Trunk Line Automatic Hold (Key Bank Hold)
Considerations
• A held call will recall if it is not retrieved before the Hold Recall Timer
• If there is no response to the Hold Recall tone, the tone is issued at the
• If your system has onhook transfer activated, and you have placed an
• An error tone is issued if you attempt to hold more than one call at once.
• The DBS can provide Music-on-Hold to callers placed on hold. See
Call Park
(CPC-S and CPC-M)
Description
You can use the Call Park function to transfer a call, even if you cannot locate
the intended recipient of the call. Simply park the call and then page the
person to whom you want to transfer the call. That person can answer the call
from any extension by dialing the number of the extension that parked the
call.
4-10
expires.
Attendant Phone. However, no tone is issued at the Attendant Phone if
Night Mode is activated.
outside call on hold and then made an Intercom Call, make sure the other
extension presses the FLASH key or hangs up before you do. If you hang
up before the other extension, the held outside line will be transferred to
that extension.
"Music-On-Hold" (page 1-24) for more information.
DBS 824-3.0/3.2-700
DSLT Features
Revised April 2000