Panasonic DBS 824 Manual page 252

Appendix A
Operation
Notes
Revised April 2000
to enable the MSG key for Auto-Answer Voice Message...
Extension Port where
VB-44225 Large-Display
Phone is installed
To Program Voice Mailbox Access Codes into the MSG Key:
Press PROG MSG [16-digit number] HOLD
The display will reflect "Regist Data".
To Confirm a Voice Mailbox Access Code Programmed into the
Message Key.
Press CONF MSG.
The programmed access code will be displayed.
Operation With Message Waiting Indicator. The Message Waiting Indicator on
the phone's upper right corner will flash whenever a callback message or voice
message has been received.
Operation During Call States. The MSG key will work only when the phone is
idle, receiving dial tone, or in Directory Mode (via select key).
Operation If Phone Has Both a Callback Message from another Extension and
a Voice Message. Messages are accessed in a First In, First Out order. If the
callback message was received before the voice message, then pressing the MSG
key will activate Auto-Callback first. Likewise, if the voice message was received
before the callback message, pressing the MSG key will access your Voice
Mailbox.
Interaction with Tone-Calling Mode. If an Auto-Callback is placed to a phone
that is in tone-calling mode (i.e., not voice-calling), that phone must answer or the
message canceled before another message can be accessed.
FF-Key Restriction. These MSG features cannot be assigned to an FF-key.
DBS 824-3.0/3.2-700
FF3 (ExtPort)# 53# (0 or 1)#
0=Disable MSG key from returning
a "Message Waiting".
1=Enable MSG key for returning
2.0 Features Update
a "Message Waiting".
A-15