General Installation
2.4.10 SLT Message Waiting Lamp Adaptor Unit Connection
Name and Locations
Side View
AC inlet
Specifications
1. General Description
Capacity
Control Method
Power Supplies
Connectors
2. Characteristics
DC Power Supply to Stations
Primary Power
Environmental Requirements
This is the maximum current when three TD194s are connected by DC input / output interfaces (only the main
*1
TD194 is connected to an AC outlet).
110
Power light
Ground terminal
Corresponding extensions
CPU: One-chip microcomputer
Interface: 1-APT Interface
Primary Power
Secondary
Stations
DC Input / Output Interface
Connector ( TO SYSTEM )
Connector ( TO EXTN )
Binders
DC input / output
connector
16
120 V AC, 60 Hz
Station Supply Voltage: + 85 V
Circuit Voltage: + 5 V, + 15 V
50-pin Amphenol Connector
4-pin Connector
85 V, 1.2 mA (max)
120 V AC, 60 Hz, 0.8 A (max)
0 °C – 40 °C / 32 °F – 104 °F, 10 % – 90 % rel. hum.
*1
Installation Manual