Panasonic KX-TD1232 Installation Manual page 113

Inserting the Connector
1.
Insert the two 50-pin connectors to the jacks as shown below.
The connector "TO SYSTEM" should be connected to the cable which is connected to the
KX-TD816 / KX-TD1232.
Also, the connector "TO EXTN" should be connected to the cable which is connected to the
extensions.
To System (TD816 / TD1232)
2.
Insert the cables through the binders.
3.
If two units are connected with the DC IN / OUT, insert the 4-pin connectors to the jacks
as shown on the next page.
Installation Manual
Connector ( TO SYSTEM )
Connector ( TO EXTN )
50-pin (Amphenol 57JE
series or the equivalent)
To Extensions
Binders
General Installation
Connector type
25 1
50 26
113