Philips XZ5800 Manual page 30

English
30
Problem
The nose
trimmer
attachment does
not work.
Possible cause
The cutting element
of the attachment
is very dirty, for
instance because
some nasal mucus
has dried inside the
cutting element.
Solution
Clean the cutting element
by rinsing it under the tap
with hot water. Switch on
the appliance and rinse the
cutting element once more
to remove any remaining
hairs
If rinsing the nose trimmer
under the tap does not
unblock the cutting
element, then immerse it in
a glass with warm water for
a few minutes. Then switch
on the appliance and rinse
it under the tap.