Table of Contents
Advertisement
Erasing the titles
1 Press MENU/NO in stop mode.
2 Press – or + repeatedly until "Name?" appears,
then press ENTER/YES.
3 Press – or + repeatedly until "Nm Erase?"
appears, then press ENTER/YES.
4 Press . or > repeatedly until the desired
title to erase appears, then press ENTER/YES.
"Complete!" appears and the title is erased.
To erase all the titles
Press – or + repeatedly until "Nm All Ers?"
appears, then press ENTER/YES twice after
performing 1 and 2.
To cancel erasing
Press MENU/NO.
To return to the condition before
labelling or erasing
You can return to the original condition
immediately after labelling or erasing a title (see
page 50).
Notes
• You can label a track title during play. The
playback repeats until you finish labelling.
• If the MD is record protected, "C11" and
"Protected" appear alternately and the MD cannot
be recorded. Remove the MD, then slide the record
protection tab to the closed position (see page 26).
Erasing recordings
— Erase Function
The MD deck lets you erase unwanted tracks
quickly and easily. You can restore the contents to
the condition before erasing (unerase) by using the
Undo function. Note, however, you cannot undo
an edit after performing any additional edits.
The three options for erasing recordings are:
• Erasing a single track (Track Erase).
• Erasing all tracks (All Erase).
• Erasing a portion of a track (A-B Erase).
Erasing a single track
— Track Erase Function
You can erase a track simply by selecting its track
number. When you erase a track, the total number
of tracks on the MD decreases by one and all the
tracks following the erased one are renumbered.
E.g.: Erasing track 2.
Track
1
2
number
Original
A
B
tracks
1
2
After
A
C
ERASE
When erasing multiple tracks, you should proceed
in order from high to low track number to prevent
the renumbering of tracks that have not been
erased yet.
2
3,4
1
Erase track 2
3
4
C
D
3
D
3,5
3,4
continued
43
Advertisement
Table of Contents
