How To Use; Basic Operating Procedure - Sanyo MLS-3751 Instruction Manual

How to Use

Basic operating procedure

1. Liquid sterilization
cycle
Sterilization
2. Sterilization/Heat-
retention cycle
1. Install the exhaust tank.
2. Set the power switch to ON.
3. Open the cover.
4. Pour the heating water.
5. Place sterilization objects inside.
6. Close the cover.
7. Press the cycle/program selector button.
8. Change the settings
(for program operation).
9. Press the start button.
Sterilization/Melting
Heat-retention
10. Operation is completed.
11. Open the cover.
12. Take out the sterilization objects.
13. Set the power switch to OFF.
14. Drain off the heating water
(for program operation).
3. Melting/Heat-
retention cycle
4. Equipment sterilization
cycle
Sterilization
Reference
page
15
16
16
17
17
17
18
19
24
20
21
21
22
22
22
24
14