Sanyo MLS-3751 Instruction Manual page 6

Safety Precautions
Be careful about the position of the
exhaust hose insertion holes.
Be sure to insert the hose in the tank into the holes
at the back inside the exhaust tank.
Failure to observe this caution may cause large steam
leaks from the tank on the rear side.
When using the exhaust tank attached
to the product, insert the exhaust hose
packings securely in the holes of the
exhaust tank.
Be sure to use the exhaust tank attached to the product.
If the packings of the exhaust hose have not been
inserted sufficiently, steam may escape and result in
burns.
Insert the hose securely.
Be sure to insert the hose down to the bottom of
the exhaust tank on the rear side.
Incomplete hose insertion may cause steam or hot
water to spill over the tank.
5
CAUTION
Hose in tank
Do not allow children to use or play
with the product.
Failure to observe this caution may result in burns,
electric shock or injury.
Keep your head away when opening
the cover at the end of operation.
Since high-temperature steam will escape when the
cover is opened, wait until the steam dissipates.
During this time, keep your head away from the
product.
Failure to observe this caution may result in burns.
Keep away from the safety valve vent.
Keep your head away from the safety valve vent
when steam escapes.Set the power switch to
OFF position, shut down the main power and
contact the dealer from whom you purchased the
product.
Failure to observe this caution may result in burns.
Do not stick your fingers in the hinged
part of the cover.
Your fingers may be pinched and injured.